I will be reaching out to eibach and a few other companies on thier spring rates within the next month or so and will be updating this thread.anybody has the spring rate for the new eibach sportline that just recently came out?
Looks awesome! Post hasnt died just havent had time to reach out to the companies to fill in more info and id assume most people during covid are busy or broke lol. But thank you for your post! Hows the ride so far?Why did this post die?
I was excited to share my install.
2017 Civic Si Sedan
H&R Lowering Springs
Eibach Rear Camber Kit
Rides well, been driving in sports mode only. I bought some volk rims but I won’t receive them until January 2021. Very happy how car looks now lowered looks better.Looks awesome! Post hasnt died just havent had time to reach out to the companies to fill in more info and id assume most people during covid are busy or broke lol. But thank you for your post! Hows the ride so far?
Awesome look forward to seeing the final product!Rides well, been driving in sports mode only. I bought some volk rims but I won’t receive them until January 2021. Very happy how car looks now lowered looks better.
I don't have ktuned but you'll be ok, it's only an inch drop. I run d2 (1.9 inch drop) along w 25mm/20mm spacers and still no rubbingNot sure if I missed it on this thread or I’m just blind, anyone running K tuned lowering springs on OEM rims and tires? If so any rubbing or scrubbing? I wanna drop a little amount nothing crazy and don’t wanna roll fenders or anything like that. Thank you in advance
See post #86 in this thread. I'm running K-Tuned springs on OEM wheels and tires. No rubbing, scrubbing or anything. No camber kit needed either - front camber w/in spec and rear camber is only 0.2° past the -2.0° limit. The drop is about 1.2" all around.Not sure if I missed it on this thread or I’m just blind, anyone running K tuned lowering springs on OEM rims and tires? If so any rubbing or scrubbing? I wanna drop a little amount nothing crazy and don’t wanna roll fenders or anything like that. Thank you in advance
How's the ride quality on these coils? The 6k spring rates don't seem too stiff. These look like a very solid option that's not too expensive especially with ADS cancellers.Tein Flex Z Coilovers that I installed myself. Installed the coils based on Teins recommendations on their manual along with SPC rear camber arms.
I am directly comparing them to Eibach Pro Kits which I was on prior to installing these Teins. There was a drastic improvement in ride quality from the Eibachs to the Teins; It feels very much like stock even after the springs settled. In regards to stiffness, I adjusted them towards the softer side; I’m 5 clicks from soft on the front and 6 clicks from soft on the rear. I regret not going to coils from the get go. I feel like I wasted money on the Pro Kits to be honest...oh well, I’m happy now with my current set up.How's the ride quality on these coils? The 6k spring rates don't seem too stiff. These look like a very solid option that's not too expensive especially with ADS cancellers.