Si KTuner Feature Release - Civic Si - OTF Map Switching

[davemarco]

You only turn off cruise to make the adjustments. You can turn cruise back on (or leave it off, if desired) afterwards.

Apologies, maybe I misunderstood how the new feature works. I thought that the Cruise Control "on" button now allowed you to switch between Normal/Sport map sets. Is this accurate?

Sponsored

 

[KTuner]

These features only work with the KTuner unit plugged in the ecu port right??

The features are there any time. Your chosen tune is only saved and loaded at key on currently if you have the unit connected.

It looks like the "Turbo Spool" selection is gone from my new version under quick adjustments, is this setting still available?

Responsiveness moved to the Tune categories shown in the original post. Spool as a quick adjustment was never available on the Si. It's not needed.

Apologies, maybe I misunderstood how the new feature works. I thought that the Cruise Control "on" button now allowed you to switch between Normal/Sport map sets. Is this accurate?

Having the "Cruise" indicator on disables rev hang, just like it used to, and also disables the ability to enter these menus. It's assumed with cruise enabled you actually want the cruise buttons to control cruise control.

 

[davemarco]

The features are there any time. Your chosen tune is only saved and loaded at key on currently if you have the unit connected.



Responsiveness moved to the Tune categories shown in the original post. Spool as a quick adjustment was never available on the Si. It's not needed.



Having the "Cruise" indicator on disables rev hang, just like it used to, and also disables the ability to enter these menus. It's assumed with cruise enabled you actually want the cruise buttons to control cruise control.

Got it! The new features are mapped to the other cruise control buttons when cruise is turned off. Makes sense!

 

[KTuner]

Got it! The new features are mapped to the other cruise control buttons when cruise is turned off. Makes sense!

Yessir!

 

[CrippleRipple]

Responsiveness moved to the Tune categories shown in the original post. Spool as a quick adjustment was never available on the Si. It's not needed.

Weird , I swear I had it maxed out on my old version. Thank you!

Can't wait to try the new settings tonight hopefully! Will give my impressions!

 

[KTuner]

Weird , I swear I had it maxed out on my old version. Thank you!

Can't wait to try the new settings tonight hopefully! Will give my impressions!

Hoping it goes smooth for you!

 

[raynist]

So you can switch between the 3 tunes without having the ktuner connected?

If the ktuner is not connected which of the 3 tunes are enabled at startup?

 

[dc2turbo]

With the V1.2 or V2 connected to the OBD port it will remember your tune selection and load it up at next key on, so no need to switch every single time you start the vehicle. For those who don't keep the unit connected remember it will switch your tune to the last one you switched to when you do connect it next time. This feature also starts in tune 1 by default with no unit connected. That means Tune 1 can be easily used as a low boost valet mode! Just remove your unit when you leave the vehicle.

So you can switch between the 3 tunes without having the ktuner connected?

If the ktuner is not connected which of the 3 tunes are enabled at startup?

 

[raynist]

^^^^^

Thanks - that clears up which tune is loaded when no unit connected.

Maybe my reading comprehension is bad but still not fully understanding if I can switch between the 3 tunes if no unit connected.

 

[SparknAll]

Yes you can, having the unit plugged in will allow it to remember which tune you last selected for next start up, with out the unit in it will default to tune #1.

 

[raynist]

Yes you can, having the unit plugged in will allow it to remember which tune you last selected for next start up, with out the unit in it will default to tune #1.

Awesome, thanks!

I will load stock tune as number one when this is available for non si’s

 

[royson345]

KTuner FTW once again! Great work!

 

[CrippleRipple]

Got my new OTF maps loaded up this weekend! Awesome stuff! Loved the OTF switching and so did my wife! The rev counter to note your tune is slick!
My wife was even able to switch the tune for something less aggressive to drive on the way home from the grocery store, worked great! Think I got her back on the KTuner for the CRV

Only thing I didn't try was the launch control but I've sure I won't be disappointed!

Amazing work by KTuner and an even better product keeps getting better! These on-going improvements and community support for various companies/projects is just another reason why I chose KTuner!

Took years to get these features not even a decade ago and I had to pay $1200 or so for my stand alone unit that even compares! We've really got it made!

 

[BoostedDreams]

For those who have vit stage 1, is it possible to incorporate that into one of the 3 tunes?

 

[AsianGuy98]

I dont see why not.

Sponsored