dsm_mikey
Senior Member
- First Name
- Mike
- Joined
- Mar 27, 2020
- Threads
- 10
- Messages
- 87
- Reaction score
- 124
- Location
- Elkhart Lake, Wisconsin
- Vehicle(s)
- 23 CTR, 23 ZL1 1LE, 07 S2000, 05 350Z, 86 190e 16V
- Thread starter
- #1
Hey all, looking for those with experience on this topic...
Looking for feedback on this pad setup for the track...
Currently I have Raybestos ST43 pads installed Front and Rear...good choice or are ST43's on the front and OEM pads in the back a better choice?
I will be staying with the ST43's in the front either way
Also, I drive the car on the street, so the ST43's in the rear rattle around quite a bit, so if the rear ST43's are marginally better than OEM I will probably stay with the OEM pads for now.
Anyone run the car both ways?
Thank you in advance for any feedback!
Looking for feedback on this pad setup for the track...
Currently I have Raybestos ST43 pads installed Front and Rear...good choice or are ST43's on the front and OEM pads in the back a better choice?
I will be staying with the ST43's in the front either way
Also, I drive the car on the street, so the ST43's in the rear rattle around quite a bit, so if the rear ST43's are marginally better than OEM I will probably stay with the OEM pads for now.
Anyone run the car both ways?
Thank you in advance for any feedback!
Sponsored