FaintReality
Member
- Thread starter
- #1
I purchased some new LED taillights and now my 17' EX sedan won't start. However, it will start with the remote start, just not the push button start.
I noticed the 10 amp stop light fuse under hood was blown. Replaced and blew again. Replaced with a 15 amp and car fired up, but once shut off would not turn back on and fuse was blow again.
I decided to put stock taillights back in along with new 10 amp fuse and all is well.
Is there some trick to make these work? They are listed as plug and play.
Thanks in advance.
I noticed the 10 amp stop light fuse under hood was blown. Replaced and blew again. Replaced with a 15 amp and car fired up, but once shut off would not turn back on and fuse was blow again.
I decided to put stock taillights back in along with new 10 amp fuse and all is well.
Is there some trick to make these work? They are listed as plug and play.
Thanks in advance.
Sponsored