Alignment Fail? Eibach Pro Kit

[ICanB23]

Loving the mild drop with the Eibach Pro Kit. I got my alignment done at Firestone (lifetime alignments) twice now, but I'm not sure if this is right. I am aware of the slight negative camber in the rear, but they told me this is the best they can do about the toe. Also, i feel like they're pretty off with the caster up front. Would you guys recommend I try this again at a different shop? I'm just not an expert with alignment specs but I feel like this isn't right. Any knowledge or thoughts on this would be greatly appreciated! TIA

 

[Rone811]

Did you buy a Eibach camber kit for the rear?
This set up is H&R lowering springs and Eibach cambers

Not sure if that helps

 

[ICanB23]

Did you buy a Eibach camber kit for the rear?
This set up is H&R lowering springs and Eibach cambers

Not sure if that helps

Many members say a camber kit isn’t completely necessary for the pro kit, as its only a 1 inch drop. So no, im not running one ?. I was just wondering if Firestone gave me a garbage alignment or not. Caster up front and rear toe are my concerns.

 

[jayy_swish]

Besides camber, everything falls within the window, doesn’t look bad to me. If it’s tire wear paranoia then just rotate tires more often. I rotate my tires every oil change, since it doesn’t take long

 

[Rone811]

Many members say a camber kit isn’t completely necessary for the pro kit, as its only a 1 inch drop. So no, im not running one ?. I was just wondering if Firestone gave me a garbage alignment or not. Caster up front and rear toe are my concerns.

Thats exactly what I told my friend and his response was when your unevenly eating your tire tread then you’ll wish you got yourself a camber kit. My kit is 1.25 drop in front and 1 inch in rear. This members advice is get your self a camber kit. ??

 

[Benster]

caster can't be adjusted on these cars so you're stuck with whatever you got short of getting the whiteline bushings for the anti-lift. Rear toe isn't ideal for sure but within spec still.

 

[SleepyCivic]

Did you buy a Eibach camber kit for the rear?
This set up is H&R lowering springs and Eibach cambers

Not sure if that helps

Off topic but what lip/side skirts are you running?

 

[jdm_mike]

Off topic but what lip/side skirts are you running?

Looks like a Type R lip. An example can be found here

 

[Rone811]

Off topic but what lip/side skirts are you running?

Not off topic at all haha

ABS DYNAMICS Front Sides Rear
Front replaces stock
Sides are drilled into existing oem sides
Rear replaces stock

 

[SleepyCivic]

Not off topic at all haha

ABS DYNAMICS Front Sides Rear
Front replaces stock
Sides are drilled into existing oem sides
Rear replaces stock

Dope, thanks!

Sponsored