DIY: retrofit Hondalink to LX/Sport

[astrazinca]

still AM/FM not working my existing turner port doesn't have AM/FM power source
i connect the radio to power source but the scan button not active

Sponsored

 

[qukquk]

still AM/FM not working my existing turner port doesn't have AM/FM power source
i connect the radio to power source but the scan button not active

You can try conectar that blue wire to E1 on 16P, check my previous post about the diagram, hope it will heph

 

[astrazinca]

You can try conectar that blue wire to E1 on 16P, check my previous post about the diagram, hope it will heph

Great i will do it today and confirm if its working

but please can you help me about the connection of
A9,A19,A20 from old 24P

because its not available with the diagram of new (3911-TBA ) 24P

 

[jdmsleepr]

Great i will do it today and confirm if its working

but please can you help me about the connection of
A9,A19,A20 from old 24P

because its not available with the diagram of new (3911-TBA ) 24P

You can just plug the old harness into the new radio and have steering wheel controls still functioning. No need to worry about doing anything to those wires.

 

[astrazinca]

thanks Jdmsleeper

i do that already but still steering wheel controls , source , call , end call not response all other suction works well

 

[jdmsleepr]

thanks Jdmsleeper

i do that already but still steering wheel controls , source , call , end call not response all other suction works well

Source not working is normal as EX and above do not use that button as source but rather a select button. The call buttons however worked perfectly for me on my swap so I don't know what is happening

 

[qukquk]

Great i will do it today and confirm if its working

but please can you help me about the connection of
A9,A19,A20 from old 24P

because its not available with the diagram of new (3911-TBA ) 24P

You can refer my post #59, that comes the 24p diagram.

https://www.civicx.com/threads/diy-retrofit-hondalink-to-lx-sport.15805/page-4#post-448338

The source button doesn't function but call and hang up work well

 

[kittyrichie]

For those who have completed this: did you have to contact Honda for the theft code?

 

[qukquk]

For those who have completed this: did you have to contact Honda for the theft code?

I bought the used headunit in USA, and get the code on Honda official website.

Just put any post code and headunit serial number.

https://radio-navicode.honda.com

 

[jpixta]

Hey guys I'm having troubles getting this to work. My tablet/HU doesn't power up or anything. Any help is appreciated.

Heres the model of "brains" I got. Everything else is the same models as the original post.

I purchased the correct fitting connectors for the 5 pin and 16 pin, does it look like those wires are in correctly?

Heres the 16 pin with the display cont wire going to the 5 pin connector, I don't use radio so not doing anything with the FM Tuner

Does it look properly terminated?

The 5 pin connector wires, brown, black spliced as per tutorial

I used these as jumpers and reterminated them in a dupont connector then shoved them in the 5 and 16 pin

the "tablet I bought" same model as first post

gps connector

The old headunit still powers up fine, so the splices still work and the fuse isn't blown..

In 3.2 he says to -Route a wire lead from the 15th pin of the 32 pin to the interior fusebox, could someone help me understand what this is for?
If someone could take the time to help me out that would be super helpful Thank you!

 

[qukquk]

Hey guys I'm having troubles getting this to work. My tablet/HU doesn't power up or anything. Any help is appreciated.

Heres the model of "brains" I got. Everything else is the same models as the original post.

I purchased the correct fitting connectors for the 5 pin and 16 pin, does it look like those wires are in correctly?

Heres the 16 pin with the display cont wire going to the 5 pin connector, I don't use radio so not doing anything with the FM Tuner

Does it look properly terminated?

The 5 pin connector wires, brown, black spliced as per tutorial

I used these as jumpers and reterminated them in a dupont connector then shoved them in the 5 and 16 pin

the "tablet I bought" same model as first post

gps connector

The old headunit still powers up fine, so the splices still work and the fuse isn't blown..

In 3.2 he says to -Route a wire lead from the 15th pin of the 32 pin to the interior fusebox, could someone help me understand what this is for?
If someone could take the time to help me out that would be super helpful Thank you!

Hi the wiring seems ok, but you might want double check if you wired the 24p conector with 5p conector?

As I remember the Dupont connector are dif to the JAE insert conector, you might need to double check.

Hope it helps.

 

[astrazinca]

please can you guide me about the Dupont connector location

 

[jpixta]

Does this look right?

 

[MFKilla]

Some PDFs with diagrams and connections
https://drive.google.com/drive/folders/1Gm_XXh4xWW_ijBsD0oTzXZCnSkJdgi8x?usp=sharing

 

[MFKilla]

starting my project
navi civic X to RSX)

Sponsored