Trying with 10A power supply - still same. Dont work.Do you have power on the 5pin connector fot he tablet display?
Yes. LVDS cable connected to MAIN UNIT and LCDThat's interesting...
Can you provide photos of your actual Setup?
Do you have the LVDS going to the tablet display as well? Please check if the Attached PDF helps to check the wiring.
you power on main unit with LCD display with AM/FM TUNER or without? I dont have AM/FM tuner yet. May be this is problem?That's interesting...
E4 pin wire i can use simple cable?Basically everything looks correct. It should turn on.
I found this site https://www.digikey.com/products/en...14b&quantity=&ColumnSort=0&page=1&pageSize=25As I remember should be JAE series AG5 terminals, but it didn't sell on amazon pretty hard to get only from AliExpress or Japan.
look at my schema.Thanks everyone for the help!
Sorry I'm confused? The 24p a3 is continuous power correct? How would you go about doing what you suggest?look at my schema.
24P A1 not needed connect to 5P #5 pin. As 24P A3 in 5P #1 pin
You need add both wires to MAIN GROUND and MAIN 12v+
Here is the connector:Hello i was wondering about to install new FM/AM adapter , seeking for the exact area for fixing but i cant found the 10p cable for connection , can any one guide me please for right location and installation