Power Estimate on FBO Civic SI

[Jigapix]

Hey guys, I have a 2018 Civic Si Coupe with the following mods:

aFe Takeda Intake
RV6 Catted downpipe and frontpipe
Invidia Gemini R400 Exhaust
Mishimoto Intercooler (Stock pipes)
Ktuner V2 with Phearable 1.5R (22 psi map)

How much crank horsepower or wheel horsepower do you think i’m pushing? I’m not in a position to get a dyno run done so I thought i’d just get some numbers together. Thank you!

Sponsored

 

[speedyserg]

aFe Takeda Intake
RV6 Catted downpipe and frontpipe
Invidia Gemini R400 Exhaust
Mishimoto Intercooler (Stock pipes)
Ktuner V2 with Phearable 1.5R (22 psi map)

Tough to say - what fuel?
Stock turbo is pretty limited but with e30 you could easily be 250 to 275whp
On piss water 91 not so much - car makes 185ish whp stock and with a tune probably 220ish

Buy a draggy and track your progress. Easiest way to tell if your car is performing better is an easy 40 to 100 or 60 to 130 hit. For lower power cars the 40 to 100 makes more sense and you can set the draggy to start and stop at any speed you decide is good for you. It's not perfect but at least you'll have some data - even do a 1/4 mile and see what your trap speed is....that will also help you get a ballpark for the power you are actually making.

 

[CivicOops]

What fuel? I'm assuming you are on 93 octane since you are using Phearable 1.5R?

If everything is working properly you should be somewhere around 215-230whp.

 

[Jigapix]

I exclusively run 93 octane. Thanks for the replies!

 

[madchiller]

Phearable 1.5 RACE website says the below...

Level 1: Low Boost / ~19.5psi** (212 HP 262 TQ)
Level 2: Medium Boost / ~22psi** (226 HP 281 TQ)
Level 3: High Boost / ~26psi** (249 HP 302 TQ)

Sponsored