amyisquiet
Senior Member
- First Name
- Amy
- Joined
- Aug 29, 2018
- Threads
- 6
- Messages
- 58
- Reaction score
- 10
- Location
- US
- Vehicle(s)
- civic fc1
7200rpmWhat rpm do you get full boost on w1?
Sponsored
7200rpmWhat rpm do you get full boost on w1?
I guess I meant when does boost come in? I am at 26psi by 4000rpms with the RV6, just curious at what rpm the W1 starts to hit full boost.7200rpm
I have 93 datalogs, I'll work on getting them uploaded tonight for youYes, I want to check the comparison of MAF, but I don’t have E85 here, only 91oct, so E85 datalog is not universal to me.
About the sameI guess I meant when does boost come in? I am at 26psi by 4000rpms with the RV6, just curious at what rpm the W1 starts to hit full boost.
Thanks, will have to check that out tonight when at my laptop.
Something to keep in mind is the volume of air will be different if you’re using a race maf vs street maf. I was on the prl race maf but had super bad fuel trims at idle so I switched to the street maf.Yes, I want to check the comparison of MAF, but I don’t have E85 here, only 91oct, so E85 datalog is not universal to me.
I am also 26PSI, I will reach the peak at 3600 rpm,I guess I meant when does boost come in? I am at 26psi by 4000rpms with the RV6, just curious at what rpm the W1 starts to hit full boost.
Yes, I have race maf, I adjusted the maf zoom myself, so I can reach +-3 STFT at idle speed,Something to keep in mind is the volume of air will be different if you’re using a race maf vs street maf. I was on the prl race maf but had super bad fuel trims at idle so I switched to the street maf.
I don't have a blanket but I had mine jethot coated. You can pretty much touch the turbo housing with a bare finger and it's warm to the touch while the downpipe is scolding.While I'm still waiting on my clutch, I thought I'd ask a couple questions:
1) @RV6 do you recommend a turbo blanket?
1a) If yes, will the PTP turbo blanket that fits the stock turbo fit on this one as well?
If anyone has one on theirs right now, feel free to comment as well.
Waiting for your datalogI don't have a blanket but I had mine jethot coated. You can pretty much touch the turbo housing with a bare finger and it's warm to the touch while the downpipe is scolding.
Sorry for the delay busy weekend. What format do you want it in? Kdlg? Or excel?Waiting for your datalog
not able to upload in either format, I can email you the ktuner file direct. not a computer wiz not sure how to get the file uploaded to here.Waiting for your datalog
You should be able to upload a file if you zip it first. Just saying, in case you need to at some point!not able to upload in either format, I can email you the ktuner file direct. not a computer wiz not sure how to get the file uploaded to here.
what would be best AFR on pump gas & E30?Timing low maybe 300 or just under but with the current timing at 28 a rough estimate puts it at 313. But this is based on pulls made with the Hondata not hitting my fuel request. That was at a lean for me afr of low 12. My target was 11.3 which should have created more energy. I’m going to ktuner this weekend and see what happens.