Aggressive Wheel Fitment Thread

[Rc1989]

what are you lowered on, any modification, any rubbing of any kind with those 265s?

I'm on d2 springs. Rubs on dips near corner light.

Sponsored

 

[Rc1989]

Added mud guards . Kinda shows the drop on d2 springs. Didnt roll anything and there's no fender tab to modify. Rubs near side marker . Plastic fender liner .

 

[joshhjackson2112]

I am very happy to finally be able to post on this thread.
Enkei TS-10
18 / 9.5 / +35
Pilot Sport 4S
245 / 40
Stock Suspension
No fender rolling or tab modifications
So far no rubbing with just me in the car.
I weight about 135 lb

 

[joshhjackson2112]

Thank you!
I wish I could have gotten +40 in the same type of wheel. The +35 is a little more aggressive than I wanted. I think if I can get a little camber in the front to counter the poke in the top end, I will be a lot happier. I wonder if lowering with prokit, the natural camber will be enough?

 

[blackfc1]

Motegi traklite 18x9 +35 with 265/35.

Fender has a slight pull and the tab was rolled. -1.7 camber in front. Still rubs a bit on the fender liner.

 

[tsmoove]

Motegi traklite 18x9 +35 with 265/35.

Fender has a slight pull and the tab was rolled. -1.7 camber in front. Still rubs a bit on the fender liner.

Dropped with what? Love the color combo.

 

[blackfc1]

Dropped with what? Love the color combo.

Thank you, sir! I’m on Swift springs.

 

[rhino]

245/40 btw

you on stock suspension im new into the car world and like that look a lot

 

[gtman]

Motegi traklite 18x9 +35 with 265/35.

Fender has a slight pull and the tab was rolled. -1.7 camber in front. Still rubs a bit on the fender liner.

I gotta say, the drop, the color combo and the stance are as spot on as I've seen.

 

[blackfc1]

I gotta say, the drop, the color combo and the stance are as spot on as I've seen.

Much appreciated, brotha!

 

[jbatman1080]

Had my car for 2 years and been lurking around the forums for a while now. Literally just got my set up today. Def need a wash for a proper shoot lol

2017 Civic Hatchback EX
BC Coilovers w/ Swift Springs
SSR SP3
18x9.5 +30 All Around 235/40/18
Front Fenders Rolled
Rear Fenders Shaved
No Rubbing, full front turn clearance.

how did u shave ur fenders

 

[swanarg]

Thank you!
I wish I could have gotten +40 in the same type of wheel. The +35 is a little more aggressive than I wanted. I think if I can get a little camber in the front to counter the poke in the top end, I will be a lot happier. I wonder if lowering with prokit, the natural camber will be enough?

If you run the pro kit with the strut pin removal mod you can achieve -1 camber up front. That’s what I’m running. It’s not much but it is noticeable stance-wise also I get better turn in/ front end grip thanks to the extra camber

 

[Fc3_Si]

2017 Honda Civic Si Coupe
Skunk2 Lowering Springs
Aodhan Ds02
18x9.5 +30
235/40/18
Front Fenders: Lightly Rolled
Rear Fender: Untouched
Alignment: Stock Spec

 

[swah_fk7]

Feel like some of you guys would be able to answer this, would I be able to run 17x9 +12 on a Civic Sport or am I cutting it too close?

I ran a 18x9 +12 no issues. Just pokes a lot.

 

[Civic_Si_Yes]

Im in the market for AVID.1 AV-20 18x9.5 Gun Metal 5-114.3 [+38mm]

I have a 18 SI lowered on D2 springs, would this work without rolling fenders etc?

Wanted to run stock tires (235/40’s) but don’t want the stretched look

Considering 255/35’s but don’t want to deal with rubbing etc since this is my DD.

All help is greatly appreciated. Thanks

Sponsored