I made 380/370 on pump gas on the mustang dyno and as soon as they added the flex fuel, the car made 360 and informed me the traction control was acting up and couldnt get accurate reading.
so with hpfl its ok to use with stock hpfp? I’ve always thought it can only be used with aftermarket...
No im still on stock HPFL. Im only on E25 too. My LTFT stays on -3.1 when my foot is on the gas and goes up to -10 when im off gas. The STFT fluctuate as it should between 0 to -2
I have a 2019 Fk8 and I've been having issues building boost and the max psi would reach between 10psi up to 17psi, but anything above that the car struggles and would go down to 10psi when i continue pressing on the gas. The car never went on limp mode or throw any codes. I've checked with the...
Im currently looking to buy a coilover for my fk8. Im debating between Ohlins and Fortune 510. My car is mostly daily driven, but im going to start getting into track. I took my car for a mountain spirit drive and even the car feel planted i feel like theres room for improvement with the...
My current set up is 18x9.5 +38 Te37SL wrapped with 265/35/18 and using Project kics R40 Conix Lug nuts. My front fenders and rear panels are modified, lastly im lowered on swift springs. Im trying to get my fitment somewhat flush so im trying to see if 5mm or 8mm is ok to run without replacing...
The issue was fixed. I dont exactly know what i did though to completely fix it. But the things i did was just doing the calibration process except the voltage check. I bought a scanner to read the live data. I adjusted the nut enough to get the reading close to the oem spec, then i connected...