vacuum line sizes after turbo inlet pipe install.

[vounted]

hey y’all,
i bought a prl TIP and CAI recently from a local seller. both parts came with missing accessories so i was wondering if anyone can let me know the vacuum line size for both of these? it’ll be listed below. i believe the line to the waste gate is 5/32 but not sure about the one that goes into the inlet pipe. thank you!

Sponsored

 

[bt67]

Also looking for this part, the one I had does not fit but the other three worked fine. Did you find the size?

 

[vounted]

Also looking for this part, the one I had does not fit but the other three worked fine. Did you find the size?

yea which one did u need? the bigger or smaller?

 

[bt67]

yea which one did u need? the bigger or smaller?

The top one that goes into the inlet, not the bypass valve. I was going to try to match it up tomorrow at the parts store but it may help to know what exactly I am looking for, I do not want to have any boost issues! Thanks in advance

 

[vounted]

The top one that goes into the inlet, not the bypass valve. I was going to try to match it up tomorrow at the parts store but it may help to know what exactly I am looking for, I do not want to have any boost issues! Thanks in advance

the bigger one is 7/32th the smaller one is 5/32th i believe. i’m forsure about the 7/32th but just take the hose off and then have them compared em

 

[bt67]

the bigger one is 7/32th the smaller one is 5/32th i believe. i’m forsure about the 7/32th but just take the hose off and then have them compared em

I believe I have the right one now, going to put it on later today! I will report back after. Thanks for your help!

 

[vounted]

I believe I have the right one now, going to put it on later today! I will report back after. Thanks for your help!

hope u figured it out man!

 

[bt67]

hope u figured it out man!

The inlets in and working great, just wanted to report back, first hose I got from them fit perfectly, not too big or small.

Thank you for all your help getting my car back to driving and tons of fun!

 

[vounted]

The inlets in and working great, just wanted to report back, first hose I got from them fit perfectly, not too big or small.

Thank you for all your help getting my car back to driving and tons of fun!

make sure u ziptie it down brother!

Sponsored