25mm wheel spacers 20mm

Shawn2shawn

Banned
Banned
First Name
Shawn
Joined
Nov 18, 2020
Threads
11
Messages
104
Reaction score
28
Location
Canada
Vehicle(s)
Honda
Country flag
  • Thread starter
  • Banned
  • #1
Hi I'm planning on going with 25mm h&r wheel spacers rear and 20mm front, I'm on eibach sport line springs, wheels are Bolt Circle: 5x114.3Size: 18x8 in.Finish: Gloss BronzeOffset: 42Centre and tires are 235/40R18, will i run in to any issues? I'm doing these spacers because I recently got the 27won bbk.
Thanks
Sponsored

 

jayy_swish

Senior Member
First Name
Jay
Joined
Mar 10, 2020
Threads
18
Messages
1,291
Reaction score
890
Location
Los Angeles
Vehicle(s)
2019 Honda Civic Sport Touring
Country flag
Hi I'm planning on going with 25mm h&r wheel spacers rear and 20mm front, I'm on eibach sport line springs, wheels are Bolt Circle: 5x114.3Size: 18x8 in.Finish: Gloss BronzeOffset: 42Centre and tires are 235/40R18, will i run in to any issues? I'm doing these spacers because I recently got the 27won bbk.
Thanks
If your offfset is +42 a 25mm spacer is wayyyyy too much and a 20mm spacer is on the verge of needing fender rolling. The sweet spot is +30 or +35. I would try a 5mm or better yet a 10mm spacer. Do you have a photo of the wheels?

edit. Just saw you are running 18x8, I would go with a 20mm or 15mm
 

hobby-man

Senior Member
First Name
Mike
Joined
Jun 20, 2018
Threads
50
Messages
2,867
Reaction score
2,739
Location
GTA
Vehicle(s)
2021 WRX STi, 2018 Sport Touring Hatchback (sold)
Build Thread
Link
Country flag
I would try 20 if the 15s require you to cut/replace your wheel studs
 

jayy_swish

Senior Member
First Name
Jay
Joined
Mar 10, 2020
Threads
18
Messages
1,291
Reaction score
890
Location
Los Angeles
Vehicle(s)
2019 Honda Civic Sport Touring
Country flag
^ agreed. Which they most likely will so I’d go 20mm. I heard mix’s reviews on H&R spacers also, their studs snap. Looking into garageline what most of the 10th gen community buys
 

hobby-man

Senior Member
First Name
Mike
Joined
Jun 20, 2018
Threads
50
Messages
2,867
Reaction score
2,739
Location
GTA
Vehicle(s)
2021 WRX STi, 2018 Sport Touring Hatchback (sold)
Build Thread
Link
Country flag
^ agreed. Which they most likely will so I’d go 20mm. I heard mix’s reviews on H&R spacers also, their studs snap. Looking into garageline what most of the 10th gen community buys
I am running HRs with no issues yet. Seems very well built to my eye.
 


OP
OP

Shawn2shawn

Banned
Banned
First Name
Shawn
Joined
Nov 18, 2020
Threads
11
Messages
104
Reaction score
28
Location
Canada
Vehicle(s)
Honda
Country flag
  • Thread starter
  • Banned
  • #6
If your offfset is +42 a 25mm spacer is wayyyyy too much and a 20mm spacer is on the verge of needing fender rolling. The sweet spot is +30 or +35. I would try a 5mm or better yet a 10mm spacer. Do you have a photo of the wheels?

edit. Just saw you are running 18x8, I would go with a 20mm or 15mm
Yes here's the wheels, is it 20mm front or all around?

Honda Civic 10th gen 25mm wheel spacers 20mm 20200413_141845


Honda Civic 10th gen 25mm wheel spacers 20mm 20200707_181601
 

jayy_swish

Senior Member
First Name
Jay
Joined
Mar 10, 2020
Threads
18
Messages
1,291
Reaction score
890
Location
Los Angeles
Vehicle(s)
2019 Honda Civic Sport Touring
Country flag
I am running HRs with no issues yet. Seems very well built to my eye.
My friend had them on his accord, while driving one snapped. Got a replacement from HR and those later had another one snap. Ended up getting rid of them all together. Could have been a bad batch, but if it works it works... just not in my friends case lol.
 

hobby-man

Senior Member
First Name
Mike
Joined
Jun 20, 2018
Threads
50
Messages
2,867
Reaction score
2,739
Location
GTA
Vehicle(s)
2021 WRX STi, 2018 Sport Touring Hatchback (sold)
Build Thread
Link
Country flag
My friend had them on his accord, while driving one snapped. Got a replacement from HR and those later had another one snap. Ended up getting rid of them all together. Could have been a bad batch, but if it works it works... just not in my friends case lol.
Damn lol well thanks for that!! Something new to worry about when driving around. :p
 


OP
OP

Shawn2shawn

Banned
Banned
First Name
Shawn
Joined
Nov 18, 2020
Threads
11
Messages
104
Reaction score
28
Location
Canada
Vehicle(s)
Honda
Country flag
20mm all around is fine, for a uniformed look
Would 25mm rear and 20mm front be too much? Would it look weird? BTW the pictures with car, the wheels are on 15mm wheel spacer front and 20mm rear, but the reason I'm going bigger the wheels spacers are because of the 27won bbk,
 

jayy_swish

Senior Member
First Name
Jay
Joined
Mar 10, 2020
Threads
18
Messages
1,291
Reaction score
890
Location
Los Angeles
Vehicle(s)
2019 Honda Civic Sport Touring
Country flag
Would 25mm rear and 20mm front be too much? Would it look weird? BTW the pictures with car, the wheels are on 15mm wheel spacer front and 20mm rear, but the reason I'm going bigger the wheels spacers are because of the 27won bbk,
Have you tried using 27won’s BBK template? Should help a lot. I think you’ll even be fine with 15mm spacers. They don’t pop out that much since they have a bracket that seats them in further back then say a genesis BBK conversion. I have a +35 offset with a 3mm spacer on the front with a genesis BBK conversion and it sits fine (which are bulkier and harder to find a wheel fitment because of the way they sit), but 25mm to the rear looks like it’ll have a good amount of poke. Are you on lowering springs/coilovers?

Honda Civic 10th gen 25mm wheel spacers 20mm 7988646C-5C8D-4DD1-95F4-107D19E8E1A3
 
OP
OP

Shawn2shawn

Banned
Banned
First Name
Shawn
Joined
Nov 18, 2020
Threads
11
Messages
104
Reaction score
28
Location
Canada
Vehicle(s)
Honda
Country flag
Have you tried using 27won’s BBK template? Should help a lot. I think you’ll even be fine with 15mm spacers. They don’t pop out that much since they have a bracket that seats them in further back then say a genesis BBK conversion. I have a +35 offset with a 3mm spacer on the front with a genesis BBK conversion and it sits fine (which are bulkier and harder to find a wheel fitment because of the way they sit), but 25mm to the rear looks like it’ll have a good amount of poke. Are you on lowering springs/coilovers?

7988646C-5C8D-4DD1-95F4-107D19E8E1A3.jpeg
I did try the template and with the 15mm spacers front it's be really close like1/4 inch away than I did the template with 20mm and there's alot of space but I don't want the front wheels to poke out more than the rear. And yes I'm on eibach sport line springs
 
OP
OP

Shawn2shawn

Banned
Banned
First Name
Shawn
Joined
Nov 18, 2020
Threads
11
Messages
104
Reaction score
28
Location
Canada
Vehicle(s)
Honda
Country flag
Here's a picture of the wheels sitting on 15mm front and 20mm rear while on eibach sportline
Honda Civic 10th gen 25mm wheel spacers 20mm 20200702_203055
, you think an extra 5mm front and extra 5mm rear will make it poke out a lot more than what it's currently on?
 

hobby-man

Senior Member
First Name
Mike
Joined
Jun 20, 2018
Threads
50
Messages
2,867
Reaction score
2,739
Location
GTA
Vehicle(s)
2021 WRX STi, 2018 Sport Touring Hatchback (sold)
Build Thread
Link
Country flag
Here's a picture of the wheels sitting on 15mm front and 20mm rear while on eibach sportline
20200702_203055.jpg
, you think an extra 5mm front and extra 5mm rear will make it poke out a lot more than what it's currently on?
Are you not already rubbing like crazy with 20mm on the rear and those wheels?
 


 


Top