front underbody spoiler

[RiceFingaz]

Auto Nation dealership in Valencia, CA completed the install. The first time they used the stock parts which had some zip tie like clip to hold it in place. I had them re do it and they used the same snap clips like the one in the hood to secure (which is much better to use).

Sponsored

 

[hikaru]

The zip ties are attached to the bumper with double sided tab, and put secure it with caps. I tossed them away, and put self taping screws instead.

I also put the side underbody spoilers for hatchback on my sedan.

 

[KnoxTn17Si]

The zip ties are attached to the bumper with double sided tab, and put secure it with caps. I tossed them away, and put self taping screws instead.

I also put the side underbody spoilers for hatchback on my sedan.

I noticed you still have the front mud guards on. Do they fit perfectly or did you dremal it out to fit with the hatch side under spoiler?

 

[hikaru]

I noticed you still have the front mud guards on. Do they fit perfectly or did you dremal it out to fit with the hatch side under spoiler?

The side under spoilers are not all the way to the front to begin with on the hatchback, the contours on these spoilers fit perfectly on sedan side skirts. No modifications are needed.

 

[KnoxTn17Si]

The zip ties are attached to the bumper with double sided tab, and put secure it with caps. I tossed them away, and put self taping screws instead.

I also put the side underbody spoilers for hatchback on my sedan.

I take it you had the sides painted black also since I only see them in orange and red? Also, your mud guards look shiny in pictures. Did you have them painted also?

 

[hikaru]

I take it you had the sides painted black also since I only see them in orange and red? Also, your mud guards look shiny in pictures. Did you have them painted also?

Yes, I have the under spoilers and splash guards all painted in glossy black to go with the grill.

I don’t see the red could go with the LSM.

 

[Romeoridgee]

The zip ties are attached to the bumper with double sided tab, and put secure it with caps. I tossed them away, and put self taping screws instead.

I also put the side underbody spoilers for hatchback on my sedan.

How did you determine where holes go on side skirt? Did you just line it up or did you use templates?

 

[hikaru]

How did you determine where holes go on side skirt? Did you just line it up or did you use templates?

No templates. Just line up the bottom with your skirts. Check my post where I put up all the how to.

https://www.civicx.com/threads/side-under-body-spoilers-from-hatchback-on-sedan.37953/

 

[aldo]

Ok wanted to post back up here, recently guy parks next to me with the red front spoiler and the middle of it is almost rubbing the ground lol. So yeah I have seen one that I’m guessing was improperly installed? Who knows mine is holding up well, fingers crossed

 

[ozzie1230]

I'll post pics before and after I scrape the thing off pulling into my driveway the first time.

I'm telling myself it'll be fine--it doesn't look like it takes away clearance THAT much. Maybe an inch, max?

Just back your car in every single time you park it and you should be fine lol. I am debating getting this as well.

Sponsored