Economical Exhaust tips

[joserevelo]

So quick note or warning for anyone that puts on a longer tip. Mine happen to fall off which was completely my fault. When I went to put on the new one I noticed some melting. I'm a little bummed but you can't see it at regular angles anyhow.

oh man!!!!!!!! that's horrible man... I guess I'm going OEM tip route forsure now.. sorry to see that

Sponsored

 

[nielboy]

Imo these don't look right since the rear bumper doesn't have any space for an exhaust exit

It's old school....that's how they all used to look.

Great job guys......cars forums are the best!

 

[nielboy]

http://r.ebay.com/eBeigO

That link is closed....here is the new one from same seller.

http://www.ebay.com/itm/GENUINE-HON...899437?hash=item4afc34cfed:g:mdoAAOSwJQdW9pWM

 

[CosmicSilver]

Hey gang, anyone using the Autozone tips having any issues yet?

 

[ichii]

Would this work?
http://www.ebay.com/itm/Stainless-S...ash=item28187fbeec:g:jkgAAOSwgQ9VwbhP&vxp=mtr

 

[ichii]

Would this work?
http://www.ebay.com/itm/Stainless-S...ash=item28187fbeec:g:jkgAAOSwgQ9VwbhP&vxp=mtr

I found these basically the same thing, but it's from Amazon
http://www.amazon.com/SUNDELY®-Stai...psc=1&redirect=true&ref_=od_aui_detailpages00
also it fits the 2016 Civic Sedan without touching the bumper. Hope it fits the coupe or else its going up for sale

 

[hluu93]

http://www.ebay.com/itm/2ps-Rear-Exhaust-Muffler-End-Tail-Pipe-Outlet-For-Honda-Civic-10th-Gen-2016-2017/262456189899?_trksid=p2047675.c100005.m1851&_trkparms=aid=222007&algo=SIC.MBE&ao=1&asc=20131003132420&meid=c7682dd67db74b68b65bf171442b5768&pid=100005&rk=2&rkt=6&sd=331869142924

These are specifically for 10th gen. They look decent in the pics. Doesn't look like it touches the bumper. Might be worth trying out.

 

[silverrascal]

http://www.ebay.com/itm/2ps-Rear-Exhaust-Muffler-End-Tail-Pipe-Outlet-For-Honda-Civic-10th-Gen-2016-2017/262456189899?_trksid=p2047675.c100005.m1851&_trkparms=aid=222007&algo=SIC.MBE&ao=1&asc=20131003132420&meid=c7682dd67db74b68b65bf171442b5768&pid=100005&rk=2&rkt=6&sd=331869142924

These are specifically for 10th gen. They look decent in the pics. Doesn't look like it touches the bumper. Might be worth trying out.

I wish the tightening bolt faced inward instead of on the outside. That would look less like an add-on, IMHO.

 

[timothyjay]

Just saw this on eBay as well and was about to share it. I think it's another good option.

http://www.ebay.com/itm/2ps-Rear-Exhaust-Muffler-End-Tail-Pipe-Outlet-For-Honda-Civic-10th-Gen-2016-2017/262456189899?_trksid=p2047675.c100005.m1851&_trkparms=aid=222007&algo=SIC.MBE&ao=1&asc=20131003132420&meid=c7682dd67db74b68b65bf171442b5768&pid=100005&rk=2&rkt=6&sd=331869142924

These are specifically for 10th gen. They look decent in the pics. Doesn't look like it touches the bumper. Might be worth trying out.

 

[CosmicTouring]

Just saw this on eBay as well and was about to share it. I think it's another good option.

Don't be fooled with the ad and pictures...it is the same as some $15 tips...I had this style before too...the curved exhaust tip fits better than this. I tried before.

 

[singjai]

The Sundely tips seem to be holding up fine. It's been a little over a month now? Haven't checked for any rusting yet though. I'll give you guys an update later. Sorry for the mediocre pictures. I was in a parking garage and just took some quick pics with my phone.

 

[ichii]

I can't get mine to fit its the same brand, I have the coupe.

 

[hluu93]

I can't get mine to fit its the same brand, I have the coupe.

Like it won't fit under the bumper or it won't fit onto the pipes? The rear is designed a bit differently. That may be why.

 

[ichii]

Like it won't fit under the bumper or it won't fit onto the pipes? The rear is designed a bit differently. That may be why.

It won't fit on the pipes, I thought it might be a defective one, but i tried the other and they both don't fit. Did you have to apply pressure to get it fitted? I dont know if it will touch the bumper yet.

 

[hluu93]

It won't fit on the pipes, I thought it might be a defective one, but i tried the other and they both don't fit. Did you have to apply pressure to get it fitted? I dont know if it will touch the bumper yet.

I just got them today. I was able to fit them over the pipe but not far down enough to tighten them properly.

Sponsored