- Joined
- Mar 21, 2018
- Threads
- 43
- Messages
- 1,778
- Reaction score
- 2,433
- Location
- planet earth
- Vehicle(s)
- '13 lambo lp550-2, '18 honda ctr cw (r-12321), 14' porsche cayman s, '16 porsche macan s, '13 mini jcw nme stage 1, '15 audi s3 apr stage 2, '15 audi q3, '12 monster 1100 evo, '16 triumph thruxton r, deposited for '19 lambo huracan performante
- Vehicle Showcase
- 2
- Thread starter
- Banned
- #1
fyi...full posting/thread is here to keep in one place for all things audio/speaker/sub related to the fk8 ctr platform. most if not all of this also apply to the civic hatchback touring model.
https://www.civicx.com/threads/full...l-and-door-speakers.27310/page-20#post-505588
we just completed the project to maximize the utilization of the stock foam tray and not waste the space. the result is spectacular! we also proved that the jl w3v3 8" deeper sub (when used with our palindrome labs deeper sub grill kit) is amazing with the matched jl xd series amp. the blend with all the jl c2 series upgrade we did for all the doors, tweeters, and center channel is so well balanced - it's our favorite setup to date.
key design objectives:
https://www.civicx.com/threads/full...l-and-door-speakers.27310/page-20#post-505588
we just completed the project to maximize the utilization of the stock foam tray and not waste the space. the result is spectacular! we also proved that the jl w3v3 8" deeper sub (when used with our palindrome labs deeper sub grill kit) is amazing with the matched jl xd series amp. the blend with all the jl c2 series upgrade we did for all the doors, tweeters, and center channel is so well balanced - it's our favorite setup to date.
key design objectives:
- maximize use of wasted space in foam tray - no need for a separate rack/box
- minimal weight added (6 lbs for amp)
- use deeper sub grill kit by palindrome labs model r12321r with stock sub enclosure
- air circulation via 2 fans (1 blows fresh air in, 1 sucks warm air out)
- rf remote controlled rgb led accent lighting
- modular - takes 2 mins to unplug and remove entire foam assembly with display for track days
- clean, proper wire management flush under the tray