anyone play with creating their own maps?

[tehSteve]

Hi everyone, I noticed that the 19.5/23psi map is slipping my clutch :/
Broke it in nicely for 800 miles and my unfortunate luck right?

I'd like to create a dual map of 19.5/21.5 psi.
Should be possible since the base maps are open for complete configuration

After looking over the 21.5psi map, I noticed that Closed Loop Settings, Fuel Cut, Ignition, and WOT Enrichment settings contain the exact same parameters as the 19/23 map. Literally number for number.

So theoretically I should just be able to copy the Boost Target table of the 21psi map and just paste it over the Boost Target - Sport table (the 23psi portion). Save and flash right?

Or my other option would be just to modify the Boost Target - Sport table of the 23psi map, and anywhere I see the numbers 23,22.5,22 (you get the idea) and change those to 21.5. However, I would be ignoring the rest of the rev range where it is already building 1-1.5psi more boost than would be using the 21psi map.

So yeah, I should just be able to copy the 21.5 table over the 23 table without any issues right?

Sponsored

 

[FKSE7EN]

@KTuner s awesome customer support verified this with me earlier that it’s perfectly fine to copy over boost target tables from one to the other. I created my own dual starter targeting 18psi for eco and 21 psi eco off. On the preloaded dual target, max psi that I could hit on eco was 14. I just wanted a bit more for eco driving. Shoutout to @360glitch for his help as well!

Ktuner’s tunes have me grinning from ear to ear!!

 

[tehSteve]

I must've missed the post Thank you for the awesome info

 

[KTuner]

Yessir. It's that easy!

 

[tehSteve]

Yessir. It's that easy!

Thank you very much!
It certainly is pretty easy, but you never know the comfort level of people.
Do you think it is possible to just add the 19.5/21.5 map into the next software update? Or however it works?

I'm good to go, but I'm just trying to lookout for the rest

 

[KTuner]

Thank you very much!
It certainly is pretty easy, but you never know the comfort level of people.
Do you think it is possible to just add the 19.5/21.5 map into the next software update? Or however it works?

I'm good to go, but I'm just trying to lookout for the rest

Not a bad idea.

 

[Si_Gus]

@KTuner are the afr readings accurate? I have a zietronix wideband that I've used on my previous cars to tune which i did see an option on ktuner for it.

 

[KTuner]

@KTuner are the afr readings accurate? I have a zietronix wideband that I've used on my previous cars to tune which i did see an option on ktuner for it.

They're actually quite accurate overall. Super rich they start to sway.

Sponsored