turbociv910
Senior Member
- First Name
- taylor
- Joined
- Jun 24, 2019
- Threads
- 22
- Messages
- 1,010
- Reaction score
- 993
- Location
- wilmington nc
- Vehicle(s)
- 2020 SGP Civic Type R, Audi Q5
- Build Thread
- Link
- Thread starter
- #31
Packing peanuts.. galore!
I opted for no coating because I was going to get them painted to match. Also they did not put the MAF sensor in. I deleted it because motec doesent use it.
contents Laid out on the table
broke out my tools to start taking things off. Was anxious to tear into it.
Only issue was a bolt broke on the turbo, but the stud is sticking out far enough to weld a nut to it and try again.
Nice billet oil feed with external thread milling. Was expecting just a 1/8 tapped plate with a adapter fitting.
Thank you matco guy for selling me these stud removers.
Rampage studs with the efr flanged full-race Manifold
Test fitting and getting everything how I want it.
I opted for no coating because I was going to get them painted to match. Also they did not put the MAF sensor in. I deleted it because motec doesent use it.
contents Laid out on the table
broke out my tools to start taking things off. Was anxious to tear into it.
Only issue was a bolt broke on the turbo, but the stud is sticking out far enough to weld a nut to it and try again.
Nice billet oil feed with external thread milling. Was expecting just a 1/8 tapped plate with a adapter fitting.
Thank you matco guy for selling me these stud removers.
Rampage studs with the efr flanged full-race Manifold
Test fitting and getting everything how I want it.