SI: Ktuner Calibrations

[LilToTo17]

Reached out to KTuner first, still haven't heard back...

Weird I am chatting with them like a half hour ago lol email based they reply real quick.

Sponsored

 

[bahndrvr]

check your pm

That's awesome man thank you! MAP responded earlier and said you didn't pay for a tune - I explained but haven't heard back, looks like what you sent me is what I will go with! Thank you!!!!!!!!!!!!!!!!!!!

 

[LilToTo17]

That's awesome man thank you! MAP responded earlier and said you didn't pay for a tune - I explained but haven't heard back, looks like what you sent me is what I will go with! Thank you!!!!!!!!!!!!!!!!!!!

What did he send you lol?

 

[KTuner]

Reached out to KTuner first, still haven't heard back...

Anything that's come in since the close of business yesterday has been responded to. Not sure I received anything from you. Send again if not.

 

[chaosnyx]

@KTuner I flashed this tune and I encounter a problem. I would try to downshift, and when I rev-match, it wouldn’t let me rev over about 4.5k. I’m wondering if it because of no lift shift set at 4350rpm for this tune.

 

[KTuner]

@KTuner I flashed this tune and I encounter a problem. I would try to downshift, and when I rev-match, it wouldn’t let me rev over about 4.5k. I’m wondering if it because of no lift shift set at 4350rpm for this tune.

If you have no lift shift setup then it is active when the clutch is depressed fully. 4350 is a pretty low setting.

 

[raynist]

Can someone post the BBG table screenshots? I would like to do this BBG on my EX-T Manual but I can’t open the tune file since I don’t have an SI

Thanks

 

[KTuner]

BBG isn't setup by default so it will be the same as yours with a new file open.

 

[raynist]

BBG isn't setup by default so it will be the same as yours with a new file open.

I see my BBG for any of my tunes is set to 33 psi. I was hoping someone would post a picture of how they set it up for this tune so I can replicate.

 

[KTuner]

See the online help, as it shows you how to limit to say 15PSI. Given that, if you'd rather limit to 17 simply change the values to reflect!

http://ktuner.com/KTunerHelp/boost_by_gear_limits.htm

Sponsored