Purchased FortuneAuto 500 Coilovers

[LampRod]

As the title says I ordered some FortuneAuto500 coilovers with the upgraded swift springs in the front. 9k springs front 8k rear. What other supporting mods should I get in terms of suspension, chamber and toe arms for example. The coilover allows for -3 degrees of chamber in the front but no adjustment in the rear. The only other mod that would effect this is my wheels, 18 by 9.5 +35 offset. Im planning to go about a little over an inch drop in the front and 1.5 in the back. I will be getting the car properly aligned after install.

Sponsored

 

[Benster]

You'll need a rear camber kit if you go this low. Toe arms are not a bad idea as I've seen enough factory alignments being way out of wack for rear toe and the factory adjustment couldn't bring it back enough. Start with those 2 and see how it works out, there is a plethora of other arms and mods we can do to our suspension to make it crazy solid and adjustable now so it all depends on what you want to do with the car.