It's probably 16hp somewhere in the powerband, likely not in the higher RPM range
I never believe manufacture claims so lol.
http://www.unitedspeedracing.com/index.php?id_product=119&controller=product
which intercooler do you have? this one mounts to the lower panel under the stock intercooler and fills that gap. If your intercooler hangs lower then it would only block the very lowest portion and really wouldnt cause a problem. These Setrab SLM coolers are very efficient and air flows through them well. I have a few issues with coolers going into the side of the bumper on this car. The front end aerodynamics were designed with no opening on the drivers side, and very minimal on the passengers side for the horn. I assume they have data associated with this design, and opening the grill enough to flow air to a cooler most likely will effect that airflow. Also the fender liner will have to be vented to allow air to flow through, this will cause turbulance in the wheel well, I personally have seen it in CFD aero simulation testing.
they must be backordered now, i installed one here in GAJust spoke with vivid racing, they're going to call Greddy tomorrow and get an eta on the release. You were right not available quite yet...I'll let you know as soon as I do
They did some revamp on their website and some items were effected in the process hence the in stock status.
