Lug Nuts for TE37

[#04338]

I ordered the Rays dura lugs instead for my TEs. It wont be available in the state until September though.

Just thought it would match my new set that is coming in today.

Sponsored

 

[sabeena17]

Whats the best lugs to use specially if you live where theft rate is high? Im on the process of getting some nice set of wheels but scared at the same time. Thanks

 

[jefxfree]

I got these: https://www.kamispeed.com/Kics-R40-iCONIX-M14-LugNuts-Locks-14x1-5-Black-p/kyo.wria14kk.htm

From a different seller, but these are the same ones.

 

[OverRev]

Been using McGuard for over 10 yrs on my track cars, trusted brand name made in USA. Very light weight and best is the floating seat surface. You want this so when you tighten the lug nuts the seat surface is not grinding against the rim and possibly chipping paint off of it.

 

[.grimace]

I got some titanium ones. Weight savings, strong and cheaper than the hyped up JDM brands. Add a little anti seize and 16 months later no issues.

https://ozmoengineering.com/shop/m14x1-5-conical-lugnuts/

 

[Noize]

I got some titanium ones. Weight savings, strong and cheaper than the hyped up JDM brands. Add a little anti seize and 16 months later no issues.

https://ozmoengineering.com/shop/m14x1-5-conical-lugnuts/

You got a close up shot of these installed on a wheel? Interested.

 

[.grimace]

You got a close up shot of these installed on a wheel? Interested.

best one I can find in my photos

 

[Noize]

best one I can find in my photos

Thank you, sir.

 

[Fk8tjt]

Don’t forget M14x1.5 monster lugs. Fairly on the cheaper side and they come in different finishes but the locking lugs and lug nut caps are sold separately. I’ve ran those before switching to project kics iconix M14s because the project kics have floating lug seats so it doesn’t gouge the seats on the rims but costed me quite a bit for them. I’ll probably switch to Volk formula lugs if they ever get released in M14.
(Monster lug)

(Project kics iconix)

Are those lugnuts 14x1.5?

 

[.grimace]

^^^ re-read first sentence of his post

 

[mnksauce]

Dura nut L42

I know I was curious when buying and couldn't find a good fitment picture.

 

[Noize]

Jumped on the Kics bandwagon.

 

[Apex Carver]

You guys dont find the kics too long? I find them almost too long for Volks. They stick out a fair bit.

 

[Dirty_panda]

Does anyone know the torque specs for the rays dura nut L12? Or is it the same 94 ft lbs?

Sponsored