Poly bushings! Need front LCA bushing measurements!

[201FK8]

Hi! I was wondering if anyone have their Front LCA out that can help me get measurements so I can try to order universal poly bushings to replace it. I know theres rv6 solid joints but I'm trying to adhere to a certain class solid bushings aren't allowed unfortunately. I appreciate the help!

Sponsored

 

[YattleMe]

I could probably help you out. I have the Rv6 set in the box still

 

[201FK8]

I could probably help you out. I have the Rv6 set in the box still

Thank you so much!

 

[JO3L]

Whiteline and also SuperPro both have poly bushing options available for the Type R. No need to measure or do anything custom.

 

[201FK8]

Whiteline and also SuperPro both have poly bushing options available for the Type R. No need to measure or do anything custom.

Any link? Because I already have the white line anti lift kit. There's another bushing in the front LCA as far as I know only rv6 has the replacement

 

[201FK8]

I could probably help you out. I have the Rv6 set in the box still

If you can give me theae measurements I would greatly appreciate it!

 

[JO3L]

@201FK8 I see now you are looking for the front bushing on the LCA. Looks like WL makes it, but I only see it for non FK8. Its cheap enough that it might be worth buying to try out.

https://whitelineperformance.com/products/w53618-control-arm-lower-inner-front-bushing-kit

You really aren't going to be able to get the bushing OD unless you press it out of the arm first. Otherwise all you would be measuring is the outer flange diameter.

 

[YattleMe]

If you can give me theae measurements I would greatly appreciate it!

I'll take the measurements when i get home

 

[201FK8]

I'll take the measurements when i get home

Appreciate it brother!

 

[YattleMe]

 

[201FK8]

Thank you so much! This is clutch I'll update as soon as I find a place that can make the bushings

 

[201FK8]

Sad looks like no universal kit that fits nor company willing to custom made one offs. Looks like I'm going to do the ghetto route and inject polyurethane instead

Sponsored