Gram Lights transcend lugnuts

[TypeR_671]

I have the same wheel, Rev Limit Edition, and went with Project Kics Iconix (neochrome). Not cheap, but the fit and finish is first rate. Best of luck.

Thank you for the quick response, I will do a search online cause I plan to mount my wheels on Saturday.

Sponsored

 

[CWNole95]

Thank you for the quick response, I will do a search online cause I plan to mount my wheels on Saturday.

You’re very welcome and best of luck!

 

[OrchidFc3]

Thank you for the quick response, btw, very nice ...^^^^^...setup.

You're welcome, thanks much appreciated!

 

[TypeR_671]

Thank you for the quick response, btw, very nice ...^^^^^...setup.

Would you happen to have the part # on your Monster Lug packaging?

TIA

 

[TypeR_671]

Is there any part # on the packaging or does it give you the dimension for the width of the lug nut and will the key fit in the hole to tighten or remove the lug nut?

TIA

 

[OrchidFc3]

Is there any part # on the packaging or does it give you the dimension for the width of the lug nut and will the key fit in the hole to tighten or remove the lug nut?

TIA

Not sure I chucked the packaging! The key given fits the hole yes.

 

[TypeR_671]

Not sure I chucked the packaging! The key given fits the hole yes.

If I'm not mistaken, it should say something like Part #33006Bl

Not sure I chucked the packaging! The key given fits the hole yes.

 

[TypeR_671]

Yes and it’s a tight fit. The kics monolith’s key goes inside.

Hey Jaymarc,
Just wondering, did any of this red inner cap come out while driving? I made sure that I snapped it in until you hear a click but I've lost 2 on the first day after diving.
Thanks,

 

[Jaymarc]

Hey Jaymarc,
Just wondering, did any of this red inner cap come out while driving? I made sure that I snapped it in until you hear a click but I've lost 2 on the first day after diving.
Thanks,

I haven’t lost any thankfully. To really get it in there I used the key and lightly hammered the caps in.

 

[TypeR_671]

I haven’t lost any thankfully. To really get it in there I used the key and lightly hammered the caps in.

Thanks, I'll probably have to order a new pack. Happy holidays to you and your family from mine.

Sponsored