interior lights

  1. Driver's side only map light does not illuminate

    So, I haven't dug into the problem yet, but basically I swapped the bulb out (it was burnt out) and the new one only illuminates when I toggle the switch using the lens actuated plunger switch. The car is a 2017 Civic Sport Touring and the passenger map light and dome light both come on...
  2. Trouble with console/armrest lighting kits

    Recently, I had the local dealer install the console and armrest lighting kits in my coupe, and since then, I've had nothing but issues with the lighting in my interior. We won't dwell on the dealer, they've been nice enough so far to cover two return trips under warranty. I don't think the tech...
  3. Interior Lights not Turning on when Door Opens, Remote Start Not Working, and No locking Indication

    Hello! I have a 2019 Civic Sport Sedan and I can't seem to figure out how to get the interior lights over the driver and passenger seat (Not the rear row) to turn on when I open and close my doors. I have looked through the settings and I haven't been able to figure it out. Another issue I...
  4. Swapped to LED in the interior and now none of the bulbs works? HELP?

    Hello 10th Gen Fam. This is my first post and the new in this community, so apologies if I don't understand lingos/how to work this forum. I just recently replaced all of my bulbs inside the car to some nice LED bulbs. Everything was going great until I got to the mirror lights. I replaced the...
  5. 2017 Sport Touring Interior LED lights

    I Have the following: 1) 2017 Honda Civic Sport Touring 2) 2017 Honda Civic EX After trying several LED's I finally found the correct ones. In the 2017 models the Interior bulbs are short. Less then 1 inch in length. These LED's are for 2017 models because they are shorter and works Great...
  6. Interior LED Lighting

    Does anyone have an aftermarket LED lighting kit? I've been looking at the LEDGlow 4-piece 7-color kit for about 35 dollars. I'm interested to see if anyone has anything like this and if so, how is it installed? Any photos?
  7. Arduino Footwell lighting setup

    Just installed custom footwell RGB LED lights. The setup is controlled with an Arduino Mega. The cigarette plug is used to power the LED lights and a usb cable is used to power the Arduino. Once those two cables are plunged in and the car is either on or in accessory mode the lights are turned...
  8. exLED Interior Light Kit Review - vs Stock vs Generic LED

    If you're looking to upgrade your interior lights, the exLED kit is the way to go. It's not cheap at $70 but you get what you pay for. It includes custom LED panels for the maps, dome and trunk as well as a couple small bulbs for the license plate lights (but these are already LED so I didn't...


Top