Selling a lightly used set of redstuff ceramic pads for 27Won/Wunderladen EBC calipers. Was used for about 4k commuting miles (no track) and still have plenty of pad life left. Only used like 1mm of pad material. Brand new retail is $135. Asking for $75 + shipping.
Selling used Hardrace FK8 rear motor mount in great shape. This will fit any 10th gen model. The bushing material is hardened rubber on both ends with no voids at all. Had it on the car for about 3k miles before I took it off. There’s no added NVH with the A/C on at idle unlike some of the...
Selling used Hardrace FK8 rear motor mount in great shape. This will fit any 10th gen model. The bushing material is hardened rubber on both ends with no voids at all. Had it on the car for about 3k miles before I took it off. There’s no added NVH with the A/C on at idle unlike some of the...
These are for the pad shape that are used on 27won, EBC, and AP Racing BBKs. Used for a few hundred miles but they didn’t help with my goal of noise reduction. I don’t track my car so don’t need them. Retail price is $106. Asking for $80 shipped.
Selling like new shifter rocker arm. Bought it new but not completely satisfied after initial install. I installed this with a 2020+ CTR shifter yesterday but I thought the gate spacing was too tight in some areas so I immediately took it off. Asking for $80 shipped OBO.
Just picked up a set in 245/40/18 for only $518 shipped on discounttiredirect to replace my cupped tires. Not sure if this is a pricing error or really good black fri sale. There’s not very many sizes and only 2 in 18”.
Which shop did you use to install your subframe collars? I’m located in the north bay and probably would go to hybrid works in Vallejo to get the job done but wanted to hear any other recommendations.
Was rotating my tires today and when taking off the drivers side rear wheel I noticed some play. When pushing from the bottom of the knuckle with not much force you can see some movement and hear a squishy fluid sound coming from the shock. I tried my best to capture the sound on the video. I...
If there's a difference of 2/32" from one side to another in the rear is that ok or too much? I have one tire that has a bit of cupping on the inner edge due to a bad alignment and it makes humming noise. The tire performs fine but just makes a bit of humming noise around 35 mph and up and on...
Brand new in box. Fits many OEM Brembo calipers including Genesis calipers people use on the 10th gen and Type R. Asking $20 + shipping. I'm located in the North Bay Area for any locals.
2017 - 2023 Honda Civic Type R
2010 - 2016 Hyundai Genesis Track and R-Spec
2010 - 2021 Chevrolet Camaro SS...
Anyone have this? Seems interesting with the 4 prongs instead of filling up the entire gaps. Wonder if thats for NVH reasons.
https://www.powerflexusa.com/shop/product/pff25-1120-honda-mk10-fk8-type-r-lower-torque-mount-insert-4553?category=2464#attr=2626
For you 17-19 owners that upgraded to the OE 2020 shifter, would you say it was worth it? I have an Si with a 17-19 CTR shifter right now with Acuity base bushings and was wondering if it would be worth the time/effort to upgrade to the 20 shifter and add on Acuity rocker arm and centering spring.
I currently have the 17-19 shifter with acuity base bushings, acuity cable bushings, and acuity insulated poco knob. Really love the way it feels and shifts with the countersunk poco.
Was wondering if it would be worth the time to upgrade to the 20-21 shifter? I know the throw is even shorter...
Selling used hardrace 8722 rear motor mount. Bought off a member who used it for about 30k miles and I used it for about 1k miles until I got the hardrace fk8 blue mount. Looking for $50 + buyer pays shipping...
Is this piece essentially serving the same function as the Spoon stiff plate? Says it fits all 10th gens. Very interested.
https://hardraceusa.com/products/hr-q1002
https://www.hardrace.com/Product_detail.asp?id=4970&Car_Make=7&Car_model=18&Car_Type=463&MainType=
Upgraded to a BBK so don’t need these anymore. They are for Si models front calipers. These are street pads and not for track. Low dust, no noise, and good bite. Had them on the car for about 10,000 commute miles. Plenty of pad material left. Brand new they cost me $120. Looking to get $50...