Upper Rear Control Arm Help

[wbarber13]

Need some help, Anyone removed the upper rear control/Camber arm? The drivers side upper mount bolt is near impossible to get to so wanted to know if anyone had any tricks? The filler neck is in the way from end wrench, or socket.. Before I go crazy and drop entire subframe I figured I would ask the question. Thanks in advance.

Sponsored

 

[boibuddha]

I bought these offset wrenches to help me out. http://canadiantire.ca/en/pdp/maximum-offset-box-end-wrench-set-metric-7-pc-0588631p.html

I didn't want to risk stripping the bolts.

Even with these tools, it takes a while due to the lack of space. You're pretty much stuck turning bolts, a 1/4 turn at a time.

Your patience will be tested
Good luck.