Civic_Scott
Senior Member
- First Name
- Scott
- Joined
- Jul 4, 2018
- Threads
- 13
- Messages
- 188
- Reaction score
- 91
- Location
- Pittsburgh
- Vehicle(s)
- Civic
- Vehicle Showcase
- 2
Interested as well.
Sponsored
http://www.kahtec.com/products.htm
I use the delay version for all my cars for the third brake light. It would be nice if the delay version can be implemented in your bulbs. Bulbs blinking all the time during stop and go traffic can be annoying to the eyes so a delay of 6-8 seconds before the cycle resets:
“Blinking Smart Stop Delay is the same as the standard unit but with a "Delay-Repeat" circuit built in, Delay version was specially designed for those drivers who might not want to continuously flash their third brake light, when caught in bumper to bumper traffic. Once you have applied your brakes for the first time causing your third brake light to flash and then turn solid, touching your brakes again within 8 seconds will cause your third brake light to turn on normally without flashing. In other words, you must have your foot off the brakes for more than 8 seconds before the Blinking Smart Stop will reset and cause your third brake light to flash again“
In California, I've literally had CHP behind me and see them flash as I brake. Never pulled over for them. I got pulled over for something else once and the CHP asked about the lights. I said they were for my safety. He asked if it worked and I said "So far, I've avoided being rear-ended twice because blinking lights get attention". He said "Hmmm" and that was it.Are they legal ?
Thanks for the link... this was the one I was using before, but couldn't find the company.http://www.kahtec.com/products.htm
I use the delay version for all my cars for the third brake light. It would be nice if the delay version can be implemented in your bulbs. Bulbs blinking all the time during stop and go traffic can be annoying to the eyes so a delay of 6-8 seconds before the cycle resets