Tsp1 ktuner question

[PoorBoy]

I installed the 19.5/21 dual tune with ktuner v2 on my 2019 si.

The psi was spot on at 21 in sport. I then downloaded the tsp1 tune and I'm reading 17-18 psi in sport. I toggle with steering wheel controls up to I'm guessing map two and I still read 17-18 psi.

1.Couple questions. What psi should Ibe reading with map 2 tsp1?

2. When I toggle the steering wheel control and the rpm tach jumps up to 2k and I drive the tach needle stay at 2k. Am i supposed to press something else to activate map two?

3. Is there a way to adjust the tune before uploading to the ktuner?

Sponsored

 

[KTuner]

TSP outlines the different boost levels for each MAP setting on their website.

Until you select it, you haven't switched maps yet. http://ktuner.com/KTunerHelp/on_the_fly_map_switching.htm

The TSP tune is locked. Any settings you see are what you can alter.

 

[PoorBoy]

TSP outlines the different boost levels for each MAP setting on their website.

Until you select it, you haven't switched maps yet. http://ktuner.com/KTunerHelp/on_the_fly_map_switching.htm

The TSP tune is locked. Any settings you see are what you can alter.

Is the only way to select different maps through the steering wheel controls or is there a way to select different maps before uploading to ktuner?

Thanks

 

[KTuner]

As outlined right in the directions, if you keep your unit connected it will automatically set it to the last map chosen at key on. You can also select it on the V2 display from the menu.

Sponsored