Hondanickx
Senior Member
- First Name
- Nick
- Joined
- Jun 10, 2018
- Threads
- 61
- Messages
- 1,041
- Reaction score
- 789
- Location
- Belgium
- Vehicle(s)
- 1998 civic hatch , 2018 civic sedan 1.5T
- Build Thread
- Link
- Vehicle Showcase
- 1
If you keep it basic like gasket matching and cleaning up inside the turbine , you can do it yourself.Like this .
Any machine shop with a cnc mill could mill a radius in the compressor side.Or much like the intake valve jobs ,mill 3 angles on a regular mill and then blend them in yourself with a dremel.
I would first look if its possible to mill a radius in there (if there's enough room) .You need to measure the ID of the inlet pipe and keep that as your max OD for the compressor inlet radius.
Any machine shop with a cnc mill could mill a radius in the compressor side.Or much like the intake valve jobs ,mill 3 angles on a regular mill and then blend them in yourself with a dremel.
I would first look if its possible to mill a radius in there (if there's enough room) .You need to measure the ID of the inlet pipe and keep that as your max OD for the compressor inlet radius.
Sponsored