Show me your AEM or Injen Cai installed pics

[IDriveanSi]

AEM or Injen cold air intake wanted to see how it looks installed in the engine bay for a 10th gen Si. Thanks.

Sponsored

 

[LilToTo17]

AEM or Injen cold air intake wanted to see how it looks installed in the engine bay for a 10th gen Si. Thanks.

 

[CivicX_MD]

Is the picture from Canadian or US civic SI -- I believe the windshield washer tank is on opposite side, and this would not fit a Canadian model

 

[LilToTo17]

Is the picture from Canadian or US civic SI -- I believe the windshield washer tank is on opposite side, and this would not fit a Canadian model

USA

 

[Luckyarmpit]

 

[LilToTo17]

Yeah same exact filter placement except I have a hydroshield as well as an injen heat shield covering the bottom of the filter in case water splashes up threw the one or two tiny holes.

 

[Luckyarmpit]

Yeah same exact filter placement except I have a hydroshield as well as an injen heat shield covering the bottom of the filter in case water splashes up threw the one or two tiny holes.

Can you link me to the hydroshield, please? Thanks!

 

[LilToTo17]

Can you link me to the hydroshield, please? Thanks!

http://www.autoanything.com/air-filters/77A2582A4464073.aspx

 

[Luckyarmpit]

http://www.autoanything.com/air-filters/77A2582A4464073.aspx

Excellent, thank you! Wish I had known about that during installation; ripping apart the front end again is NOT appealing!

 

[LilToTo17]

Excellent, thank you! Wish I had known about that during installation; ripping apart the front end again is NOT appealing!

I never took off the bumper during installation. Just took of the splash shield and the lower guard to put the filter in.

 

[AsianGuy98]

Any difference in sound between a SRI and CAI?

 

[DoingOK]

 

[zachandjake]

Where did you get that engine cover?

 

[DoingOK]

Where did you get that engine cover?

eBay

 

[Jessedrice]

I have the same one on my car and am so paranoid about hydrolock. All I took off was the wheel well part under the bumper to install the filter. Did the rest from under the hood.

Sponsored