Coupe-R
Senior Member
- Joined
- Mar 22, 2018
- Threads
- 19
- Messages
- 102
- Reaction score
- 48
- Location
- -
- Vehicle(s)
- 2020 Accord 2.0T Sport | '18 Civic EX-T Coupe CVT (destroyed)
- Vehicle Showcase
- 1
- Thread starter
- #1
Hey CivicX and @KTuner ,
I'm really smashing my head with this one. I am trying to get my tune to be 23psi and actually hit it (and hold) consistently, but it's just not happening. I can not seem to exceed 20 on average, and some of the behavior of boost targets in my data log just don't make any sense.
For example, in this specific data log which logs me doing a test in a near perfect situation:
Am I doing something wrong here? Am I not setting the right values for the boost targets/final boost targets/BBG? Ray trace on all the tables points to that I should be getting a target of 23psi, but I never see the target in the logs actually be 23psi, much less see the actual 23 on the MAP. I am attaching screenshots of my tables as well as screenshots of the points in the log depicting what I'm describing. I'll even upload the datalog.
I recently had a full inspection done at my performance shop. This included getting brand new plugs, checking for boost/air leaks with a smoke machine, and much more. I am confident that I have 0 mechanical problems.
I'm really smashing my head with this one. I am trying to get my tune to be 23psi and actually hit it (and hold) consistently, but it's just not happening. I can not seem to exceed 20 on average, and some of the behavior of boost targets in my data log just don't make any sense.
For example, in this specific data log which logs me doing a test in a near perfect situation:
- I am at or around sea level,
- Ambient temperature is around 59 F,
- On a strip of road that is straight and virtually flat with no incline or decline.
Am I doing something wrong here? Am I not setting the right values for the boost targets/final boost targets/BBG? Ray trace on all the tables points to that I should be getting a target of 23psi, but I never see the target in the logs actually be 23psi, much less see the actual 23 on the MAP. I am attaching screenshots of my tables as well as screenshots of the points in the log depicting what I'm describing. I'll even upload the datalog.
I recently had a full inspection done at my performance shop. This included getting brand new plugs, checking for boost/air leaks with a smoke machine, and much more. I am confident that I have 0 mechanical problems.
Attachments
-
728.6 KB Views: 256