MrPink
Senior Member
- Joined
- Mar 26, 2017
- Threads
- 11
- Messages
- 535
- Reaction score
- 384
- Location
- Toronto
- Vehicle(s)
- 2017 Civic Type R
- Thread starter
- #1
so I switched out my rear pads and rotors.. I spun the piston with the tool and pressed it in a bit more with the other caliper tool.. everything was put back together.
I got a brake hold error... everything works as normal and stopping isnt an issue.
the weird thing is it goes away... then the next time I turn on the car it comes back, then it'll go away again... did a battery reset for 30mins and it didn't help.
if the actuators were broken they wouldn't even engage, but it engages and disengages at normal speeds.
any ideas on how to get rid of the error?
I got a brake hold error... everything works as normal and stopping isnt an issue.
the weird thing is it goes away... then the next time I turn on the car it comes back, then it'll go away again... did a battery reset for 30mins and it didn't help.
if the actuators were broken they wouldn't even engage, but it engages and disengages at normal speeds.
any ideas on how to get rid of the error?
Sponsored