ProDrager Exhaust for EX hatchback

[FK7 Civic Pilot]

can you post a pic of your car's butt ? hahaha

i think they do. they have CF & FRP. 3 different designs.

can you post a pic of your car's butt ? hahaha

Currently has factory OEM 2020 Sport diffuser.

Sponsored

 

[CAPTS]

i'll send him the pic & ask

here are some other versions they have :

 

[nrchaytor]

Did you do another dBA check with the FP / DP installed? When I checked mine ( cat back only ) peak level was around 91 - 92 dBA which I think was the same level as yours. California has a 95 dBA max limit on exhausts, which if exceeded, can result in up to $1000 fine. Daily driving with mine hasn't attracted the attention of any LEO, but was curious how much louder the front pipe and down pipe would add. Pretty sure it would exceed the sound limit.

Haven't measured the sound level with the new setup yet.. I'll do it when I get the chance and let you know the results. There's no formal sound limit law here in my province in Canada but I suspect it could still attract some attention from the police if they deemed it was excessively loud.

 

[CAPTS]

just went thru some of my DIY regarding the diffuser . . . it's better to remove the rear bumper for installation.

@FK7 Civic Pilot here's the reply i got :

 

[nrchaytor]

Here's a few video clips with the PRL catted downpipe/frontpipe installed with the ProDrager catback:








In Summary:

Stock
Idle: ~60 dBA
Peak: 74.3 dBA

ProDrager
Idle: ~80 dBA
Peak: 92.3 dBA

ProDrager with PRL catted downpipe/frontpipe
Idle: ~87 dBA
Peak: 98.0 dBA

 

[CAPTS]

Here's a few video clips with the PRL catted downpipe/frontpipe installed with the ProDrager catback:








In Summary:

Stock
Idle: ~60 dBA
Peak: 74.3 dBA

ProDrager
Idle: ~80 dBA
Peak: 92.3 dBA

ProDrager with PRL catted downpipe/frontpipe
Idle: ~87 dBA
Peak: 98.0 dBA

i find that mine is way louder than that gonna silence it a tad

 

[reubenpuan]

i got mine directly from NuN@prodrager visited his workshop, very nice guy. waited for a while for it to reach me but finally it arrived after abt 4 weeks wait as i had some custom job needed.

so far very happy with it but gonna add a silencer/resonator as it is pretty much a straight exhaust out all the way. they have many options for the muffler & the rear diffuser. titanium muffler sounds good will dig some other videos if anyone wants to see/hear more.

he hardly replies on FB so if anyone needs help or translation i can help with it as i have direct contact with him & we do keep in touch.

i like it alot, diy'ed mine at 1 of my friends shop, the original heatshield top bolt is a PITA to remove & i did not bring enough tools with me on that day but managed to get it opened without much incident. soak it with pb blaster or wd40 & a handy tip use a extended metal pipe to help with some leverage cracking bolts open.

Hi, I’m from Malaysia too and I’d like to know how much for everything include shipping? And were there any tax charged when the item arrived here?

 

[CAPTS]

Hi, I’m from Malaysia too and I’d like to know how much for everything include shipping? And were there any tax charged when the item arrived here?

I can help you order as i'm also his dealer here but i do not own a shop but now with covid19 shipping might be an issue, just be patient when mco eases off. production is ongoing at thailand bkk.
there are several options for the exhaust system mine is Ti at the rear they have SS or Ti tips too & the diffuser comes in frp or cf.

 

[reubenpuan]

I can help you order as i'm also his dealer here but i do not own a shop but now with covid19 shipping might be an issue, just be patient when mco eases off. production is ongoing at thailand bkk.
there are several options for the exhaust system mine is Ti at the rear they have SS or Ti tips too & the diffuser comes in frp or cf.

mind texting me on facebook or whatsapp instead ill be more easier to communicate haha

 

[Ayraaah_fk7]

i got mine directly from NuN@prodrager visited his workshop, very nice guy. waited for a while for it to reach me but finally it arrived after abt 4 weeks wait as i had some custom job needed.

so far very happy with it but gonna add a silencer/resonator as it is pretty much a straight exhaust out all the way. they have many options for the muffler & the rear diffuser. titanium muffler sounds good will dig some other videos if anyone wants to see/hear more.

he hardly replies on FB so if anyone needs help or translation i can help with it as i have direct contact with him & we do keep in touch.

i like it alot, diy'ed mine at 1 of my friends shop, the original heatshield top bolt is a PITA to remove & i did not bring enough tools with me on that day but managed to get it opened without much incident. soak it with pb blaster or wd40 & a handy tip use a extended metal pipe to help with some leverage cracking bolts open.

Hi! Could you help me order? Im interested. Thank you

 

[Ayraaah_fk7]

Hi Everyone! Can anyone give me their Instagram or Facebook? Thank you

 

[CAPTS]

Hi! Could you help me order? Im interested. Thank you

sure you can shoot me a pm with what you want. but they are very busy recently.

 

[Victor1221]

Hi Everyone! Can anyone give me their Instagram or Facebook? Thank you

Prodrager_extremepower on ig

 

[Victor1221]

Hi Everyone! Can anyone give me their Instagram or Facebook? Thank you

Just got mine today, ordered way back in March but corona delayed everything but they were very professional communication wise. It seemed like a scam at first but they’re 100% legit

 

[Ayraaah_fk7]

Just got mine today, ordered way back in March but corona delayed everything but they were very professional communication wise. It seemed like a scam at first but they’re 100% legit

If you dont mind may I know how much you paid for shipping?? Thanks