PRL Motorsports Project Snow White

[PRL Motorsports]

Pretty much built a whole new fuel system haha.

Well I already have the meth setup for M1. I might as well use that for my fuel supply. I really wouldnt push nearly as far as you guys. I promised myself to stop at 450-500hp. Think the gtx2860r would be up for it. Or would I need to up to a gtx2867r.

Considering we made 500+ on the GTX2860R GEN2 without nitrous and 600+ with, I think you'll be fine with your current turbo. The GTX2867R didn't exactly belch out the power we expected and was super lazy. The 2860 laid down comparable power without the lag. One thing to note, at around 500 horsepower you will be cresting the point where a larger turbine housing will be at advantage. However, the small turbine housing should get the job done without an issue.

Sponsored

 

[kshawn]

Considering we made 500+ on the GTX2860R GEN2 without nitrous and 600+ with, I think you'll be fine with your current turbo. The GTX2867R didn't exactly belch out the power we expected and was super lazy. The 2860 laid down comparable power without the lag. One thing to note, at around 500 horsepower you will be cresting the point where a larger turbine housing will be at advantage. However, the small turbine housing should get the job done without an issue.

Damn how much boost did you run on the gtx2860r to get that 500? On the race gas I'm guessing.
I was running E35 with the M1 @34, before I lost the stock block. Unfortunately I didn't get the chance to dyno xD

 

[turbociv910]

any updates? What package are you using for the ecu, and/or is it a development package

 

[PRL Motorsports]

https://s280.photobucket.com/user/p...50408466432_n_zpsbckjdhme.jpg.html?sort=3&o=1

Our shop car is undergoing open heart surgery today. We’ve recently been testing our new Setup for 2020 (Motec Systems USA ECU, Garrett – Advancing Motion GTX3076R GEN2, PRL port injection, etc) and quickly realized that Honda’s tiny 1.5L L15B7 is struggling to spool our new turbo (which is currently the largest T25 frame option for our Big Turbo Kit) and make boost up top without using nitrous to simulate a larger displacement engine. Hopefully these camshafts can help us unlock some more power and useful RPM. Just another hurdle in our quest for the most powerful 10th Gen Civic in the world.

http://prlarmy.com/Blog/open-heart-surgery-on-our-10th-gen-si-camshaft-swap/

 

[kshawn]

Excited to see the results!

Tell Frank I said thanks for the air filter

 

[Ty3366!!]

@PRL Motorsports

updates?!

 

[PRL Motorsports]

@PRL Motorsports

updates?!

Hello,
We do not have any updates from the previous post. With the intent to continue with the car the recent pandemic situation put us under an extremely limited staff for a few weeks and we have yet to recover keeping up with orders and manufacturing. Thank you for understanding during this time. Hopefully we can return to this project sooner than later and have our local track open soon!

 

[Ty3366!!]

@PRL Motorsports update?

 

[Sport-injected]

https://s280.photobucket.com/user/p...50408466432_n_zpsbckjdhme.jpg.html?sort=3&o=1

Our shop car is undergoing open heart surgery today. We’ve recently been testing our new Setup for 2020 (Motec Systems USA ECU, Garrett – Advancing Motion GTX3076R GEN2, PRL port injection, etc) and quickly realized that Honda’s tiny 1.5L L15B7 is struggling to spool our new turbo (which is currently the largest T25 frame option for our Big Turbo Kit) and make boost up top without using nitrous to simulate a larger displacement engine. Hopefully these camshafts can help us unlock some more power and useful RPM. Just another hurdle in our quest for the most powerful 10th Gen Civic in the world.

http://prlarmy.com/Blog/open-heart-surgery-on-our-10th-gen-si-camshaft-swap/

Will these cams ever be available to the general public?

 

[turbociv910]

Will these cams ever be available to the general public?

You can.. there's a company that regrinds them

 

[Sport-injected]

You can.. there's a company that regrinds them

What company, just curious.like to know my options if it ever comes to that.

Sponsored