PowerPerLiter
Specific Output
- Thread starter
- #1
Last edited:
So "2.570" is 23psi.If you look this map shouldnt exceed 23 psi and still has taper after 6k. Knock control never moves on this car even on straight pump but I do run e20 as well most of the time.
That represents the altitude or atmosphere air density the car is currently driving in. Most people will be in the .855 and up region.
So "2.570" is 23psi.
Ahh...this makes things much clearer. Thanks! I'm used to tuning naturally aspirated so I have a bit of learning curve here.Yessir. 2.57 bar is 2.57 x 14.5 - 14.5= 22.77 psi
That's makes a lot more sense. I thought you were calling for 25psi to redline lolYessir. 2.57 bar is 2.57 x 14.5 - 14.5= 22.77 psi
haha definitely not it tapers down to 21.46 by 7kThat's makes a lot more sense. I thought you were calling for 25psi to redline lol