Max Speed Limiter RPM and MPH in FlashPro for 2016 Civic EX-T with CVT

[FusionTurbo]

Hello,

I've searched the forum and Google several times regarding the subject line but haven't found anything definitive. If it's already discussed/answered, I will greatly appreciate it if you can point me to the right place.

In regard to the value for Speed Limiter RPM and MPH in the CARB version of FlashPro, I am curious to hear your thoughts on what values to set. I think the base map for +6 PSI has 3000 for the RPM and 120-something for MPH. Does it make any difference in performance if they are set at higher values? If so, what would be the max I can set them at?

Any info will be greatly appreciated. BTW, this is for a 2016 Civic EX-T with CVT.

Thank you!

Sponsored

 

[101IOI101]

From here:
https://www.hondata.com/help/flashpro/index.html?rev_limit_parameters.htm

As for the rev limiter, there's a bit of info on that page, but it's not super clear. I recall reading in another thread that Hondata said to put 6000 rpm there.

Edit: Found it http://www.civicx.com/threads/hondata-flashpro-is-now-carb-legal.11592/page-3#post-213582

 

[FusionTurbo]

Thanks for the info!

I also saw the post that recommended 6000 RPM, but thought it was a bit high.

Will there be any long term problem to have RPM set to 6000 and MPH set to 200?

 

[Hondata]

No problem.

 

[BigDaddyAlba]

Thanks for the info!

I also saw the post that recommended 6000 RPM, but thought it was a bit high.

Will there be any long term problem to have RPM set to 6000 and MPH set to 200?

Did you stick with 6000?

 

[FusionTurbo]

Did you stick with 6000?

I might have but it's been a long time since I traded in the car for a hatchback. With the hatchback I'm sticking w/ 3000 RPM.

Sponsored