Ktuner LED setup

hunkmoody

Member
Joined
Sep 7, 2018
Threads
3
Messages
12
Reaction score
2
Location
Philippines
Vehicle(s)
Honda Civic 10th Gen RS Turbo
Country flag
So i created a profile for led 1 for rpm. I have already saved the settings on the pc application (click save button) while it was connected to usb, under set 1. Does this automatically save them to the ktuner?

When i select set 1 on ktuner while connected to odb2 and engine running, led1 don’t come on while revving
Sponsored

 
OP
OP
hunkmoody

hunkmoody

Member
Joined
Sep 7, 2018
Threads
3
Messages
12
Reaction score
2
Location
Philippines
Vehicle(s)
Honda Civic 10th Gen RS Turbo
Country flag
Here’s my setting for led1 but it doesn’t light up at all.

Honda Civic 10th gen Ktuner LED setup 55BD88C3-9775-4D2F-89DC-F3B76CF425DF


Honda Civic 10th gen Ktuner LED setup 89C3A76C-A4E8-4246-9191-8E4C8C7470BA
 

KTuner

Elite Sponsor
First Name
J.R.
Joined
Jul 10, 2017
Threads
30
Messages
2,796
Reaction score
3,434
Location
Chandler, Arizona
Website
www.KTuner.com
Vehicle(s)
2017 Si
Country flag
I mentioned in email that 950 cutoff is less than 1000 activation, so it'll never turn on. Also to Load LED Set and check out the templates included in your documents folder!
 

KTuner

Elite Sponsor
First Name
J.R.
Joined
Jul 10, 2017
Threads
30
Messages
2,796
Reaction score
3,434
Location
Chandler, Arizona
Website
www.KTuner.com
Vehicle(s)
2017 Si
Country flag
If you check out the fade in templates it's easy to alter them in a fashion that will make it do so. Alter the start and stop RPM once the template is open to stagger the starting points. The warning RPM is the same for all in that example.
 

viciousknish

Senior Member
First Name
Jonathan
Joined
Dec 12, 2019
Threads
0
Messages
52
Reaction score
30
Location
New Hampshire
Vehicle(s)
1996 Civic Ex Coupe, 2007 Civic Si Sedan, 2021 Civic Type R
Country flag
Attached is a zip file with the two templates I use. One has the color scheme as shown in the settings below and the other is all red.

Here are the settings I use:

Settings:
  • Type: RPM
  • Warning Type: Above Threshold
All LEDs:
  • Warning Value: 6300 | Intensity: 70 | Color: Red (RGB 255,0,0)
  • Cutoff Value: 0
LED 1:
  • Starting Value: 2000 | Intensity: 0 | Color: Green (RGB 0,255,0)
  • Ending Value : 2999 | Intensity: 40 | Color: Green (RGB 0,255,0)
LED 2:
  • Starting Value: 3000 | Intensity: 0 | Color: Yellow (RGB 255,255,0)
  • Ending Value : 3999 | Intensity: 40 | Color: Yellow (RGB 255,255,0)
LED 3:
  • Starting Value: 4000 | Intensity: 0 | Color: Orange (RGB 255,126,0)
  • Ending Value : 4999 | Intensity: 40 | Color: Orange (RGB 255,126,0)
LED 4:
  • Starting Value: 5000 | Intensity: 0 | Color: Redish-Orange (RGB 255,63,0)
  • Ending Value : 5999 | Intensity: 40 | Color: Redish-Orange (RGB 255,63,0)
LED 5:
  • Starting Value: 6000 | Intensity: 0 | Color: Red (RGB 255,0,0)
  • Ending Value: 6299 | Intensity: 40 | Color: Red (RGB 255,0,0)
Sponsored

 

Attachments



 


Top