Just thought about the best place to

[jasonjm]

I just thought about the best place to have an intake grab air from, the fender. Granted it looks hard but still doable.

You could get fresh air there while being compartmentalised away from the engine bay heat.

The old SN95 comes to mind that I think had something similar. Could be wrong.

Sponsored

 

[FK8_K20c1]

I just thought about the best place to have an intake grab air from, the fender. Granted it looks hard but still doable.

You could get fresh air there while being compartmentalised away from the engine bay heat.

The old SN95 comes to mind that I think had something similar. Could be wrong.

I would wait for X company coming up with something

 

[jasonjm]

To make it work new brackets for both the ecu and fuse box are needed. They can be in the same place but need to be turned 90 degrees. Perhaps also height of the fuse box can be adjusted if moved. This will give enough clearance to attempt reaching over into the fender. You have to also picture that the air box is gone in this imaginary build.

 

[Fk8tjt]

Why not make a hood scoop for it

 

[02SilverSiHB]

I had a feeling that is what PRL is going to do with their intake

 

[jasonjm]

Why not make a hood scoop for it

Rain and wash water is one concern with a good scoop.

 

[jasonjm]

I had a feeling that is what PRL is going to do with their intake

Their cold air doesn’t look like it will go that far.
https://www.civicx.com/threads/prl-...ivic-type-r-fk8-cold-air-intake-system.31751/

 

[jasonjm]

Blitz might do it!!

https://www.civicx.com/threads/blitz-carbon-fiber-intake.32293/

 

[FK8_K20c1]

Blitz might do it!!

https://www.civicx.com/threads/blitz-carbon-fiber-intake.32293/

Thought of this post when I saw the picture last night.

 

[seselectronics]

Blitz might do it!!

https://www.civicx.com/threads/blitz-carbon-fiber-intake.32293/

Exacly!

 

[seselectronics]

Our OEM intake box, is good, just missing a secondary inlet scoop, I'm messing with my intake, doing some insulation testing, and also I'm thinking on add a secondary scoop.

 

[Learn2turn]

This is THE BEST place to grab air, coming off the cold side of the turbo and I am working on it

 

[seselectronics]

This is THE BEST place to grab air, coming off the cold side of the turbo and I am working on it

Nice! I'm working on the other side, like Eventuri did..

 

[seselectronics]

Nice! I'm working on the other side, like Eventuri did..

That spot go strength to the fender ,and take air from the bumper side grill

 

[Learn2turn]

Nice! I'm working on the other side, like Eventuri did..

You got me, I can't place the location. Where exactly is that taken from? Can you take a wider pic?

Sponsored