9000RPM
Senior Member
- Joined
- Feb 19, 2017
- Threads
- 16
- Messages
- 651
- Reaction score
- 654
- Location
- New Jersey
- Vehicle(s)
- '18 CTR // '14 Cayenne
- Thread starter
- #1
So I wired up my dash camera last night. Before I did the install, I snapped a photo of the original. The install went fine but looking at the owner's manual, some of the slots that are supposed to be empty have fuses in them. For example:
Fuses 10, 18, 23, and 36 are supposed to be blank according to the owner's manual but they are filled up with 20, 10, 10, and 20 amp fuse respectively.
Fuse 32 is for the "Front Seat Heater", which the Type R doesn't have, is the only 1 that was empty.
#1 fuses starts at bottom left in photo below:
Can you guys take a look and confirm this? 20amp fuse is quite high for a slot that should be empty.
Also, if they are supposed to be there, what are they for? The manual doesn't say.
Fuses 10, 18, 23, and 36 are supposed to be blank according to the owner's manual but they are filled up with 20, 10, 10, and 20 amp fuse respectively.
Fuse 32 is for the "Front Seat Heater", which the Type R doesn't have, is the only 1 that was empty.
#1 fuses starts at bottom left in photo below:
Can you guys take a look and confirm this? 20amp fuse is quite high for a slot that should be empty.
Also, if they are supposed to be there, what are they for? The manual doesn't say.
Last edited: