I replaced my Pads and my rotors

[CincyTypeR]

Thanks for the weight comparison. These will be on my radar once it is time to replace the rotors. Every bit of saved weight helps.

Sponsored

 

[17CivicTypeR_Brian]

Not sure, I think it was as it was listed. I bought a LOT of parts from them at one time. @JLOracing and USR are very easy to work with. Since I got a lot of parts from them, I am running One lap of America with few decals, maybe it can stir up some business for them.

Jelly! I wanted to do it but it just doesn't work out with the family this year. Hopefully when I'm older (and they're older)...

 

[scarittagle]

I am replacing my rotors tomorrow. I track my CTR heavily and use it for Time Attack competitions. I am already running GLock R10 front pads and R8 Rear pads. Installing Girodisc 2-Piece rotors and titanium pad shims tomorrow in preperation for a Time Attack this weekend. You can call Chinchi at www.UnitedSpeedRacing.com to order the GLock Pads and Girodisc rotors and shims

What grease did you use on between the shim and backside of the brake pad?

 

[CTR1633FK2]

What grease did you use on between the shim and backside of the brake pad?

Grease will transfer heat from pad to shim and caliper. Why would you do that?

 

[J35W2]

What grease did you use on between the shim and backside of the brake pad?

Hawk pads come with a high heat grease that you should use. It helped to eliminate all brake noise when I changed the pads.

 

[scarittagle]

Grease will transfer heat from pad to shim and caliper. Why would you do that?

then what do you use to stick it together?

 

[CTR1633FK2]

then what do you use to stick it together?

There are 2 holes in the shim, just like the pads. They will stay in place.

 

[scarittagle]

There are 2 holes in the shim, just like the pads. They will stay in place.

My ProjectMu brakepads doesn't come with it tho.

 

[CTR1633FK2]

My ProjectMu brakepads doesn't come with it tho.

They are not cheap: http://www.unitedspeedracing.com/index.php?id_product=114&controller=product

 

[scarittagle]

They are not cheap: http://www.unitedspeedracing.com/index.php?id_product=114&controller=product

Yep I ordered it yesterday, but I do need a recommendation for high temperature grease

 

[Maximum6]

Yep I ordered it yesterday, but I do need a recommendation for high temperature grease

https://www.permatex.com/products/l...licone-ceramic-extreme-brake-parts-lubricant/

This is what I would use

 

[scarittagle]

https://www.permatex.com/products/l...licone-ceramic-extreme-brake-parts-lubricant/

This is what I would use

I checked the review. That product isn’t any close to 3000F degree. It starts burning and turned black on 900F.... awful

 

[CTR1633FK2]

My ProjectMu brakepads doesn't come with it tho.

BTW, do you mean your brakepads don't have 2 holes at 2 corners? If yes, then you might have the wrong pads.

 

[scarittagle]

BTW, do you mean your brakepads don't have 2 holes at 2 corners? If yes, then you might have the wrong pads.

Oh you mean those 2 holes then yes the pad comes with it.

 

[CTR1633FK2]

Oh you mean those 2 holes then yes the pad comes with it.

Good. Those titanium shims have those 2 holes too. Guide pins will go through them and keep the pads and shims in place.

Sponsored