Yo can just insert the right size screwdriver in the E-ring opposite its opening and pry it out. Or needle nose pliers in the same place and pry or pull. The most important is to not let it shoot somewhere so you can't find it....
If you don't have a screwdriver handy you could also use a straight edge like a small ruler and push the clip from the open end side. Looks like it has enough meat to push it far enough to pop off or not to pop back into place.
I found out i didn't need to remove to make the switch from cloth to leather center console armrest. I only need to make the switch between the top pieces of the consoles.
I found out i didn't need to remove to make the switch from cloth to leather center console armrest. I only need to make the switch between the top pieces of the consoles.