Honda Civic Type R Intercooler OE Breakdown – Design Pt. 1

[tinyman392]

bar and plate again !
is it not possible to source tube & fin intercooer core in the US?

with the known overheating tendency of the car, we really need as much air flow to the radiator as possible.

I think HKS and the new Greddy systems are tube and fin.

Sponsored

 

[.grimace]

These still aren’t for sale huh?

 

[tinyman392]

These still aren’t for sale huh?

I'm still waiting for more info (power, temp diffs, price, dimensions etc.) on the intercooler. Not sure which intercooler I'm going to install, but I'm in the market for one in the next couple months.

 

[Vincent@27WON]

I'm still waiting for more info (power, temp diffs, price, dimensions etc.) on the intercooler. Not sure which intercooler I'm going to install, but I'm in the market for one in the next couple months.

will have alot of that info posted on our web listing once we get it up. If you have not yet checked out our blogs there is some good info in there. You can also read up on our L15 FMIC listing as alot of the same style of testing and design went into both of our cores.

 

[b2point0h]

will have alot of that info posted on our web listing once we get it up. If you have not yet checked out our blogs there is some good info in there. You can also read up on our L15 FMIC listing as alot of the same style of testing and design went into both of our cores.

Any update on ETA? Race season is just about here and I need a FMIC ASAP, been holding out for this but as others have said I’d like to see some final results and specs.

 

[ThorSellsCars]

any updates

 

[Vincent@27WON]

any updates

will try and get some soon, just been busy getting our L15 kit and CTR exhaust launched.

 

[CTR_Mike_FK8]

sooner I hope rather than later

 

[NapalmEnema]

In for information / availability - this thing looks like a well done Intercooler.

 

[Vincent@27WON]

Update!!!!
I am hoping to have another blog update on this intercooler by the end of the month. We also aim to start pre-orders in March. Currently, we just have 3x other releases ahead of this that I need to get out the door first

FK8 Catback systems
L15 FMIC kits
and the FC3 si coupe systems.

Once I have those completed then this and our turbo inlet pipe are the next 2 set to be released.

For better or worse we have grown at a fairly rapid pace and are running out of room so we may need to look into finding a bigger place. A project like that will be intense but ideally worth it.

I appreciate the patience and will do my best to keep everyone in the loop.

If there is some specific info that has not yet been answered in the blogs please do drop those questions below or drop a comment on the blogs so I can do my best to answer them.

-Vincent

 

[NapalmEnema]

Update!!!!
I am hoping to have another blog update on this intercooler by the end of the month. We also aim to start pre-orders in March. Currently, we just have 3x other releases ahead of this that I need to get out the door first

FK8 Catback systems
L15 FMIC kits
and the FC3 si coupe systems.

Once I have those completed then this and our turbo inlet pipe are the next 2 set to be released.

For better or worse we have grown at a fairly rapid pace and are running out of room so we may need to look into finding a bigger place. A project like that will be intense but ideally worth it.

I appreciate the patience and will do my best to keep everyone in the loop.

If there is some specific info that has not yet been answered in the blogs please do drop those questions below or drop a comment on the blogs so I can do my best to answer them.

-Vincent

Thanks for update - success is a tough problem to have but a good one. Good luck with the expansion I'll hang out to see how the intercooler develops these are parts worth waiting for imo

 

[tinyman392]

Any updates here? If not I'm most likely just going to pull the trigger on PRL (7-10% off + 0% for 12 months is a mighty good offer they got going right now).

 

[Vincent@27WON]

Any updates here? If not I'm most likely just going to pull the trigger on PRL (7-10% off + 0% for 12 months is a mighty good offer they got going right now).

parts are in production, I just have not had the time to get an update blog from my ENG. I aim to have the web listing on this up around 3/10 and start shipping end of the month.

 

[CTR_Mike_FK8]

Ooh I like this, link us when it’s ready

 

[Vincent@27WON]

Ooh I like this, link us when it’s ready

will do,

Sponsored