Highest HP champion - idragmazda!

[17CivicTypeR_Brian]

I realize this car is much better at going around curves than it is at going straight. That said, for the everyday driving, high HP certainly makes for a more interesting commute - especially if you have Interstates you frequent.

@idragmazda is the highest currently at 376 whp and 387 wtq. Full bolt ons + custom tune on 93 octane using Ktuner.


I'll review this periodically and post up the high-hp title holder in the Original Thread. Post away!

Sponsored

 

[Dragnet]

I realize this car is much better at going around curves than it is at going straight. That said, for the everyday driving, high HP certainly makes for a more interesting commute - especially if you have Interstates you frequent.

Since I'm first, I guess I can be the highest (and first to be knocked down!). I'm at 339hp presently.


I'll review this periodically and post up the high-hp title holder in the Original Thread. Post away!

I'm no fun. Mine is completely stock. But the reason I'm chiming in is if folks participate in this thread it'd also be cool for them to post info about their aftermarket parts and specific tunes they've used etc.

 

[17CivicTypeR_Brian]

Agreed. Post HP and performance mod lists please!

 

[FriscoBrah]

This would do better if posted in the engine mods forum.

 

[Dragnet]

This would do better if posted in the engine mods forum.

I figure most people don't check the subforums. I may be wrong. I know I posted something once on a subforum and it didn't get much attention. I then posted the same thing on this forum and it gained a lot more traction.

 

[17CivicTypeR_Brian]

This would do better if posted in the engine mods forum.

Yeah I thought about doing it that way. We'll see how this goes - if it dies, I'll start a new one over there. I don't think I can move but maybe @Administrator can.

 

[02SilverSiHB]

This was almost last year (Jan 2018)

Mods:
Milltek Non-Resonated exhaust

318tq and 301hp
https://www.civicx.com/threads/dyno-pull-after-milltek-exhaust-install.20518/

Hopefully next month I can get it dyno'd again.

 

[idragmazda]

376 whp and 387 wtq (+70 whp / + 82 wtq over stock baseline). Full bolt ons (PRL, Remus, PTP) + custom tune on 93 octane using Ktuner. Tuned on Dynapack by Derek at Innovative Motorworks in Carlisle, PA.

Build thread here: https://www.civicx.com/threads/type...s-review-prl-remus-ptp-usr.30111/#post-504819

 

[Solis#1730]

My most recent dyno pulls in November at RealStreet TypeR Dyno day event.

 

[02SilverSiHB]

My most recent dyno pulls in November at RealStreet TypeR Dyno day event.

mods?

I'm guessing ktuner, PRL intercooler, PRL front pipe, P2R intake pipe gasket, P2R Downpipe, AFe intak,e AFe exhuast

 

[FK8_K20c1]

My most recent dyno pulls in November at RealStreet TypeR Dyno day event.

beautiful numbers

 

[Solis#1730]

mods?

I'm guessing ktuner, PRL intercooler, PRL front pipe, P2R intake pipe gasket, P2R Downpipe, AFe intak,e AFe exhuast

Power mods are;
AFE intake, P2R downpipe, PRL frontpipe, AFE exhaust, Mishimoto intercooler, Koyorad radiator, Ktuner v2.

 

[Dragnet]

mods?

I'm guessing ktuner, PRL intercooler, PRL front pipe, P2R intake pipe gasket, P2R Downpipe, AFe intak,e AFe exhuast

How did you guess?

 

[02SilverSiHB]

How did you guess?

Lol I just looked at his posting history. I saw he ran a 13 flat...with I believe a 2.2 60ft so he could get 12s. Obviously this car isnt a drag car...so I say that's a dang good time down the strip

 

[Dragnet]

Lol I just looked at his posting history. I saw he ran a 13 flat...with I believe a 2.2 60ft so he could get 12s. Obviously this car isnt a drag car...so I say that's a dang good time down the strip

With a car with these mods how good will it pull from a roll?

Sponsored