Hardwiring Viofo A129 Dashcam with Parking Mode

  1. gorillaa

    gorillaa Member

    Joined:
    Jan 13, 2019
    Posts:
    14
    Thanked:
    0
    Location:
    Toronto
    Car(s):
    Civic
    Hi all,

    I've bought Viofo Duo A129 Dashcam with 3 wire hardwiring kit for parking mode. It has voltage cutoff.

    I plan tapping into fuse #1 ACC 10AMP fuse for IGNITION/ACC

    but I don't know which fuse to tap for constant power ON. Can someone please guide me?

    2018 Civic sedan SE (with Driver assistant aids package)
     
  2. rplush

    rplush Member

    Joined:
    Jun 20, 2019
    Posts:
    49
    Thanked:
    31
    Location:
    NY
    Car(s):
    2016 Civic EX
    buy an inexpensive multimeter and play around with the ignition switch to figure out which one is ACC or constant. Point the black to any factory ground points and the red to the slots in the kicker fuse box. Get a multimeter just to verify the information you get off the internet. You don't want to mess around with 12v blindly
     
  3. consultadrone

    consultadrone Senior Member

    Joined:
    Jun 16, 2019
    Posts:
    73
    Thanked:
    40
    Location:
    Southern California
    First Name:
    Pittman
    Car(s):
    2017 Civic Touring Coupe
    I’m pretty sure I used the power door locks for mine.
     
  4. OP
    OP
    gorillaa

    gorillaa Member

    Joined:
    Jan 13, 2019
    Posts:
    14
    Thanked:
    0
    Location:
    Toronto
    Car(s):
    Civic
    thanks guys, front camera hooked up. working..

    having real hard time trying to wire rear cam
     
Loading...

Share This Page

Loading...