FK8 Inlet Pipes

[Tim818]

One from Puerto Rico $675

One from Titanium Lab $850

One from Rampage Fab $949

One from PRL $499

 

[PrisonerOfDoom]

 

[Higgo8]

I'm not looking forward to replacing with the new inlet pipe, the A/C hose was in the way when it came to removing one of the two bolts securing it to the turbo flange... Putting it back together is harder then taking it apart as well!

 

[FK8_K20c1]

Do you feel any difference with the inlet? sound wise? performance wise?

 

[PrisonerOfDoom]

Do you feel any difference with the inlet? sound wise? performance wise?

We just got 10+ inches of snow here and I haven't had a chance to drive with it yet. I'll let you know when I do.

 

[PrisonerOfDoom]

I'm not looking forward to replacing with the new inlet pipe, the A/C hose was in the way when it came to removing one of the two bolts securing it to the turbo flange... Putting it back together is harder then taking it apart as well!

With a wobbly and a couple of extensions the job is a piece of cake.

 

[Higgo8]

With a wobbly and a couple of extensions the job is a piece of cake.

Did you have issues with the AC pipe/hose running right in the line of the lower bolt for the intake pipe. on mine it was a pain in the ass, managed to get it off in the end, but wasn't just that easy as piece of cake, even disconnected the turbo actuator DT connector to find that bit more wriggle room...

 

[FK8_K20c1]

We just got 10+ inches of snow here and I haven't had a chance to drive with it yet. I'll let you know when I do.

Oh ok. Yea man temps are dropping quick. Im installing my A/S tires tomorrow.

 

[AdamD19DFK8]

I'm not looking forward to replacing with the new inlet pipe, the A/C hose was in the way when it came to removing one of the two bolts securing it to the turbo flange... Putting it back together is harder then taking it apart as well!

I lightly taped the bolt to my socket so it wouldn't fall off when getting it in position lol. Didn't have a magnetic tip. Getting that black piece to stay on was the really annoying part for me.

The a/c line I just pulled off it's holders and pushed it out of the way carefully. It's got a good bit of flex to it

 

[ExVTEC]

Where do you get the one from Puerto Rico? Link?

 

[Tim818]

Where do you get the one from Puerto Rico? Link?

Hit this guy up on Facebook:

 

[Tim818]

I’ll edit the pricing and add more if other companies make one.

 

[Tim818]

Eventuri inlet pipe
Release date: August 2020
Price: $765

 

[IHadToRun]

Eventuri inlet pipe
Release date: Spring/Summer 2020
Price: n/a $$$$

you dont even know how excited i am for this

 

[Tim818]

you dont even know how excited i am for this

Me too, I’m not going to be excited when pricing is released lol

Sponsored