seselectronics
CivicX Basic Sponsor
- First Name
- Alex
- Joined
- Apr 30, 2018
- Threads
- 65
- Messages
- 1,644
- Reaction score
- 1,154
- Location
- Florida
- Website
- www.seselectronicssolutions.com
- Vehicle(s)
- Civic type R
- Thread starter
- #1
AAES Brake Hold module
Hello Folks!
Coming soon!
Default Brake Hold ‘’ON’’ function. As you know the Type R, has the function to turn on brake hold, this allows to not step on the brake when you are on a hill or just sitting in traffic. However the most important function is when you turn off the car, the brake hold function also turns on the parking brake. How many times do we get out the car and we’re asking ourselves if we put on the parking brake? How many times do we forget to turn it on? Well this module is intended to have an precaution when we turn off the car and we want to make sure the parking brake is on, I know many people prefer to leave it in the 1st gear or in reverse. (Personally I never do, I don’t want to forget the car is in 1st gear and hit the car in front! LOL)
The module is already tested and I have a prototype, but I can take pre orders.
The price is $190 per module.
Functions: The module has a power button in case you want to turn it off, (all the functionality of the car remains the same). When the module is on, with the car on, as soon as you buckle your seatbelt there is a delay of 7 seconds and after, the (Brake Hold) function will be ‘’ON’’ automatically. If you unbuckle the seatbelt there is a delay of 7 seconds and the module will restart. If you decide to buckle your seatbelt again, the module will turn “ON’’ the (Brake Hold) function again. The functionality of the car remains the same if module is on or off.
Installation: The installation is very simple. It has a wire harness with two T tap terminal connectors. One goes to the shifter console where the (brake hold) button is located and the other goes under the driver seat, tapping the seat belt buckle device.
The time of the installation is around 15 minutes for inexperienced persons in electronics.
Paypal ready , cashapp and Zelle.
Interested PM
(Picture prototype module)
Hello Folks!
Coming soon!
Default Brake Hold ‘’ON’’ function. As you know the Type R, has the function to turn on brake hold, this allows to not step on the brake when you are on a hill or just sitting in traffic. However the most important function is when you turn off the car, the brake hold function also turns on the parking brake. How many times do we get out the car and we’re asking ourselves if we put on the parking brake? How many times do we forget to turn it on? Well this module is intended to have an precaution when we turn off the car and we want to make sure the parking brake is on, I know many people prefer to leave it in the 1st gear or in reverse. (Personally I never do, I don’t want to forget the car is in 1st gear and hit the car in front! LOL)
The module is already tested and I have a prototype, but I can take pre orders.
The price is $190 per module.
Functions: The module has a power button in case you want to turn it off, (all the functionality of the car remains the same). When the module is on, with the car on, as soon as you buckle your seatbelt there is a delay of 7 seconds and after, the (Brake Hold) function will be ‘’ON’’ automatically. If you unbuckle the seatbelt there is a delay of 7 seconds and the module will restart. If you decide to buckle your seatbelt again, the module will turn “ON’’ the (Brake Hold) function again. The functionality of the car remains the same if module is on or off.
Installation: The installation is very simple. It has a wire harness with two T tap terminal connectors. One goes to the shifter console where the (brake hold) button is located and the other goes under the driver seat, tapping the seat belt buckle device.
The time of the installation is around 15 minutes for inexperienced persons in electronics.
Paypal ready , cashapp and Zelle.
Interested PM
(Picture prototype module)
