Cusco Suspension Parts on 10th Gen Civic Coupe

[ajsti24]

Test fitted by Cusco USA Front Suspension Parts on my Civic Coupe:

Center Power Brace:

Engine Pitch Stopper:

Front Strut Bar:

You can get these Cusco Parts at your authorized Cusco Retailers/Vendors. Thanks for looking!

 

[Scarlet]

How is the NVH on the rear engine mount? Been wanting to upgrade this, but trying to stay clear of any major NVH, been leaning towards getting the R mount and possibly "window-welding" the R mount further if needed. Interested to hear your feedback on this, don't think I've seen anyone with this actually installed thus far.

 

[360glitch]

How is the NVH on the rear engine mount? Been wanting to upgrade this, but trying to stay clear of any major NVH, been leaning towards getting the R mount and possibly "window-welding" the R mount further if needed. Interested to hear your feedback on this, don't think I've seen anyone with this actually installed thus far.

Not to stray too far off topic here but I managed to induce noticeable NVH by window welding the OEM Si mount. Nothing like what I experienced the Boomba or Hasport mounts though.

 

[123towers]

Test fitted by Cusco USA Front Suspension Parts on my Civic Coupe:

Center Power Brace:

Engine Pitch Stopper:

Front Strut Bar:

You can get these Cusco Parts at your authorized Cusco Retailers/Vendors. Thanks for looking!

Makes a big difference doesn't it. I bet you noticed it once you started the car everything seemed to vibrate a lot more. But it's totally worth it once you feel how solid it is in turns and just how tight everything feels. I took my Si to Cusco a few months ago.

It's worth it!

 

[ajsti24]

How is the NVH on the rear engine mount? Been wanting to upgrade this, but trying to stay clear of any major NVH, been leaning towards getting the R mount and possibly "window-welding" the R mount further if needed. Interested to hear your feedback on this, don't think I've seen anyone with this actually installed thus far.

Yes there is an increase in vibration transmitted in the cabin, steering wheel during cold start up and acceleration from a dead stop, but did not bother me at all and did improved traction and reduced driveline slap during acceleration.

 

[ajsti24]

Makes a big difference doesn't it. I bet you noticed it once you started the car everything seemed to vibrate a lot more. But it's totally worth it once you feel how solid it is in turns and just how tight everything feels. I took my Si to Cusco a few months ago.

It's worth it!

Makes a big difference, increased vibration transmitted in the cabin did not bother me at all since i am used to increased NVH in my STi (same driveline upgrades). And Yes, it is worth it and you can't go wrong with Cusco suspension products.

 

[123towers]

Makes a big difference, increased vibration transmitted in the cabin did not bother me at all since i am used to increased NVH in my STi (same driveline upgrades). And Yes, it is worth it and you can't go wrong with Cusco suspension products.

You doing anything else to your car?

 

[ajsti24]

You doing anything else to your car?

None at this moment, but any future updates i will post on my journal

 

[CyberCT]

Any handling difference from just the Center Power Brace and Front Strut Bar? I wouldn't think they'd cause NVH when not installing the engine pitch stopper.

 

[ajsti24]

Any handling difference from just the Center Power Brace and Front Strut Bar? I wouldn't think they'd cause NVH when not installing the engine pitch stopper.

Steering response is much better and yes installing just the front strut bar and center brace would not cause/increase NVH.

 

[CyberCT]

after driving this car for a few days I must say I'm pretty damn impressed with the stock handling. The tires to make noise when turning at lower speeds but it really does feel sharp. Haven't tried pushing it to the limits though.
Suspension upgrades will come a bit later but glad to hear there's a difference. Camber adjustments in the front and rear are going to be the first mods.

 

[Hondanickx]

From what material are the Cusco braces made ?Aluminium or steel ?

 

[ajsti24]

From what material are the Cusco braces made ?Aluminium or steel ?

Most Cusco Suspension Braces are made out of aluminum and some in steel.

 

[Thanks_Enjoi]

Is this the CTR rear mount?

 

[ajsti24]

Is this the CTR rear mount?

Yes, this cusco rear mount is the same fitment for the CTR and all 10th gen Civics

Sponsored