9" Aftermarket Android Head Unit (Feature Overview / Installation)

[Yuma]

i confirm i have see this problem(see my thread with diagram) for amp version if you buy joying or other :
-remove amp oem
-add new amp or not
-use output wiring of amp oem for connect new source

but i think speaker of honda are bad ...
i have buy focal i wait for install in front door +center front and test with oem head unit(add viper4android, poweramp) and amp oem

if it's not ok i think change headunit+amp

Sponsored

 

[DavidGM]

Thank you very much for the info. I will review the comments and try to solve it.

I have the Phoenix PX5, I guess the process will be the same.

 

[Alexander]

Thank you very much for the info. I will review the comments and try to solve it.

I have the Phoenix PX5, I guess the process will be the same.

I dont have the Phoenix, but the new Joying Intel unit. So steering wheel control and on screen aircon problem might be a other problem for you then. A friend of mine has the Phoenix px5 and it works great in his car. (no premium audio)

 

[Shankmeyster]

I stopped using mine a long time ago now. First one locked up and I sent it back and they sent me a used unit that the cables for the backup camera would jostle when you hit a bump too hard and you wouldn't have a camera feed. Then it locked up too and I gave up. Also, you don't have to use the cable with the antenna for the GPS. Just use the screw on antenna and it gets signal through the dash.

 

[DavidGM]

Thanks for the feedback. I have solved all problems except audio. I have located the amp but I don't know how to do the bypass.

What should I do with these wires? I've seen Yuma's thread but I wouldn't know how to do it.

Thanks

 

[Yuma]

little answer:
connector A 18pins
A1-ground (black)
A3- +b audioamp(red in right to bottom ) be careful with A4 red for sub but - in left top











front center
add to left or right speaker or don't connect(drop and give new gps)
for + A5+ A11(blue)+A14
for - A6+A18(white bottom)+A15



front



Front speaker left wire + Front speaker right wire+
A5-frontleft speaker+ (light greeen top color) A13-frontrigh speaker+ (grey color)
+A14- frontleft tweeter +(yellow ) +A16- frontrigh tweeter +(lightgreen bottom )

Front speaker left wire - Front speaker rightt wire -
A6-frontleft speaker-(light bue) A12-frontrigh speaker-(purple?)
+A15-frontleft tweeter -(green) +A17-frontrigh tweeter -(pink)




rear+sat





Rear left speaker wire + Rear right speaker wire+
A10-rear left speaker+(blue) A8-rear right speaker+(yellowtop)
+B7-rear tweeterleft+(black)(connector B 8pins) +B5-rear right tweeter+(grey)
+B3-rear sat left +(purple) +B1-rear right sat +(red)

Rear left speaker wire - Rear left speaker wire -
A9-rear left speaker-(white top) A7-right rear speaker-(brun)
+B8-rear left tweeter-(lightgreen) +B6-rear right speaker -(light blue)
+B4-sat speaker -(pink) +B1-rear sat speaker -(green)

Subwoofer
normally in head unit sub use coax cable



other solutionsfor add amp:
buy rca cable for sub connect to focal impulse4.320

 

[Yuma]

rapid diagram
iso code color

 

[DavidGM]

Thank you!! I will try tomorrow

 

[DavidGM]

The sound is working! Thanks for helping

 

[Yuma]

you have directly cut and connect oem connector ?
i have find this connector
https://axxessinterfaces.com/product/AX-AB-HN1


drop picture for other guy

 

[DavidGM]

I provisionally passed four cables with two poles from the head unit to the amp. At the end of each of them I soldered the necessary wires (two in the case of FL, three for the rest) and then I inserted them into the connector following this diagram:

When I return from vacation I will order the connector and install it

 

[Yuma]

I forgot to put the filters for them not to put off the tweeter services....

it is necessary to put passive filters or a dsp after the exit of the post for the different lines
I explain the original amplifier has active filtering for each line tweeter, woofer, sub

two solutions either we put the filters after the outputs of the new posts:
-lowpass filter for woofer
-highpass filter for tweeter
or
dsp


or

We change the connections at the end of the line and put the filters in the doors considering that there is only one speaker

example:
you consider that you only have 4 speakers
front right and left and back right and left

DOOR DETAIL WIRING :

 

[rolivetta79]

Here is a short link with my head unit setup.

Do you have a digital amplifier that you you had bypass. How exactly did you get that hooked and did you lose any functionality?

 

[rolivetta79]

Honda Civic 2016-2019 Android CarPlay 9” stereo by GTA car kits

I didn’t view all the pages in this post, so I’m sorry if this has been posted but,
Here’s another option. This is the install video.

Your factory head units looks identical to mine. Will this work in a 2017 Civic Sport Touring?

 

[amxandy]

Do you have a digital amplifier that you you had bypass. How exactly did you get that hooked and did you lose any functionality?

I had a new amp and speakers put in. There were other posts explaining how to get the factory amp to work, but that was more time consuming than just having someone put in an amp. All of my functions work that I am aware of. If they are not there, I don't miss them.

Sponsored