2017 civic si full boost on non sport mode

[Alex_hockey69]

I have tried +6psi +9psi still always have full boost with non sport mode on i don't understand why what am i doing wrong . What am i not setting properly? Anyone else had this problem?

Sponsored

 

[LilCasper]

I have tried +6psi +9psi still always have full boost with non sport mode on i don't understand why what am i doing wrong . What am i not setting properly? Anyone else had this problem?

I have this same problem too, just blew it off for awhile. Bump.

 

[Alex_hockey69]

I have this same problem too, just blew it off for awhile. Bump.

What do you mean by that??

 

[LilCasper]

What do you mean by that??

I'm having the same problem, just adding a reply so its more likely to be seen

 

[herox]

Which tune did you flash? There's a dual map if you want to control boost with sport mode. Did you flash that?

 

[Design]

Which Tuner and which map? That will help us help you.

 

[Alex_hockey69]

Which Tuner and which map? That will help us help you.

I have a 2017civic si from Canada
I have tried all 4. +9 psi and +6psi. in non sport mode i am still getting full power when i shouldn't, what i am doing wrong or not setting properly ?

 

[Alex_hockey69]

Which tune did you flash? There's a dual map if you want to control boost with sport mode. Did you flash that?

Which one would that be ? I posted everything below

 

[herox]

In Hondata FlashPro Manager go to New Calibration. Select your model and vehicle. The dual map tunes are the ones that has "Sport" in the name or description. When you go to Calibration and then Torque you should see different values under Sport.

 

[Alex_hockey69]

In Hondata FlashPro Manager go to New Calibration. Select your model and vehicle. The dual map tunes are the ones that has "Sport" in the name or description. When you go to Calibration and then Torque you should see different values under Sport.

I have tried the 2 without the CARD.

 

[PowerPerLiter]

Take the top row and highlight all the cells under "torque limit"....right click...."set all values to" 260. As long as every number in the top row only is 260. Make sure to scroll over all the way and hit every cell. Save-then upload. Or upload and save whichever.......

 

[herox]

I have tried the 2 without the CARD.

Weird, it works for me without manually editing anything. I'm using FlashProManager V3.3.6 5/1/2019

 

[PowerPerLiter]

Its supposed to. Im thinking it may have to do with the 2019 maps needing a change.... @Hondata

 

[Alex_hockey69]

Take the top row and highlight all the cells under "torque limit"....right click...."set all values to" 260. As long as every number in the top row only is 260. Make sure to scroll over all the way and hit every cell. Save-then upload. Or upload and save whichever.......

I tried it out and i am still getting 20psi on non sport mode. Is that normal? What is your setup and whats your psi at for non sport and sport mode

 

[PowerPerLiter]

I tried it out and i am still getting 20psi on non sport mode. Is that normal? What is your setup and whats your psi at for non sport and sport mode

Whoops that's what I use. Technically 20 is as advertised stock. Lol....

250 should be around 16 psi.

I forgot that I never went back down that low once i went to merge one day and the power wasn't there like I expected it when I really needed it

Sponsored